This mode is only supposed to be used by cases when:
- in-dialog offerer doesn't have own MoH capabilities; and
- still want the recipient to hear the MoH music; hence
- an offerer checks whether a recipient is capable of MoH,
and launches a player based on given capabilities;
- the rest functions the same as with usual MoH hold;
Other information:
- `mode=reflect` is only to be used within dialog,
so, it's not meant for a session origination,
and hence stands alone from other MoH option flags
that actually give a metadata (e.g. blob data)
- `mode=reflect` hence contradicts with `mode=sendrecv`
which in its turn serves another purpose
Usage:
- `moh => { mode => 'reflect' }`
Change-Id: I8d0d55f2711c6b47bfca17691582c1ffe66eae3d
Add a possibility to add opts when actually
creating new media player.
This can be useful for cases with MoH implementation.
Change-Id: Ie7f9d290cd5e46063dd4095d57a521396b58bcfb
If the receiver of a previously passthrough T.30 stream gets switched to
a generated PCM stream from a T.38 gateway, continue the sequencing of
the previous SSRC. Technically this is not necessary as the generated
PCM stream gets a new SSRC, but at least Asterisk seems to ignore this
and expect sequencing to continue, and will ignore PCM if the sequence
jump is too large.
Change-Id: Ia4656770db11f5fa1a1e9bf5bd71a0398deb1e00
Use the call's memory arena to store strings (in particular the media
blob), and use intrusive allocation storage for the blob str itself.
Change-Id: I3a3d480869d61a2e66a24e88ad135bacca947072
Make `moh-max-duration` available for both
music-on-hold functionality as well as
for the media player.
For that to work, do the following:
- keep `moh-max-duration` config option only for MoH,
if not set (so 0) by default is 1800000ms (half an hour)
- for the play media functionality introduce flag option
`repeat-duration`, by default is disabled
Policy changes:
- duration counter can be used in common with repeats
counter, but then takes a precedence over it.
Hence if first a duration is underflown, then EOF triggered.
Otherwise if the duration counter is still positive, but
repeats are negative, then do EOF based on repeats.
- the repeats counter will always count down during each
iteration, even when used together with the duration counter
For MoH to survive, the repeats counter is simple set to 999
to let the duration counter always win over repeats one
- MoH cannot take duration disabled, since otherwise
would make no sense for it. Hence always takes internally
defined value 1800000ms (half an hour) if not defined
by the configuration option
Backwards compatibility:
- is kept in regards of repeats counter
- is kept in regards of the play media functionality
Change-Id: I48ff3c17c9bed31f80c3106b275b703a9ccb4b26
Sendrecv mode flag controls whether the sendrecv
state is forced to sendrecv, instead of the default
one sendonly, in the SDP body going towards recipient
(the one who will receive the MoH media).
Is declared as: moh=[mode=sendrecv]
Can be useful for corner cases, where the remote side
wants to see sendrecv state for whatever reason,
when getting MoH media and hence also remain in sendrecv
state in regards of the MoH originator.
Must be advertised once during the session origination,
nd then will affect the SDP body as soon as SDP sendonly
body is received (from the behalf of one, who advertised MoH
capabilities).
Backwards compatibility: doesn't affect non-MoH calls.
And doesn't affect offer/answer exchanges within MoH calls,
which do not put the remote side on hold.
Additionally: introduce a common function for the MoH flags
handling: `call_ml_moh_handle_flags()`, which does all
the required iterations/checks for the whole bunch of flags
at once.
Additionally: previously existing MoH tests adopted.
Additionally: new test introduced to check the SDP content,
when using mode sendrecv flag.
Remark: this flag is not mutually exclusive with
the zero-connection MoH flag.
Change-Id: I5bf6699f6890d8b927107cc143a18116efe45087
Zero-connection flag controls whether the connection
address offered in the SDP body going towards recipient
(the one who will receive the MoH media), is set
to all zeroes.
Is declared as: moh=[connection=zero]
Can be useful for older client implementations,
who want to see zeroed media when receiving sendonly
and getting put on hold.
Must be advertised once during the session origination,
and then will affect the SDP body as soon as SDP sendonly
body is received (from the behalf of one, who advertised MoH
capabilities).
SDP body recovers to the real IP addresses being inserted
into recipient's SDP, as soon as the media gets unheld.
Backwards compatibility: doesn't affect non-MoH calls.
And doesn't affect offer/answer exchanges within MoH calls,
which do not put the remote side on hold.
Additionally: previously existing MoH test adopted.
Additionally: new test introduced to check the SDP content,
when using zero-connection flag.
Change-Id: If0c38a3d294e6d5fe3886bee19ff2382e5705f9a
Add duration limit for the moh functionality.
This is required due to a possibility to get
monologues and hence packet streams stuck
forever and sending audio to recipients
which already don't exist.
A configuration option that controls that:
`moh-max-duration` - gets a value in milliseconds.
By default is set to 1800000 (half an hour).
Change-Id: Id50a0a10ce5b52b3876a3122fb16a71accec90ff
Introduced Music on Hold functionality:
- available only for the offer/answer model,
no other scenarios (publish, subscriber etc.)
are covered with it
- it gets advertised always at the beginning of
the call (original offer/answer exchange)
- can be added for both sides: offerer/answerer
- the one who advertises its MoH capabilities
with its SDP offer or answer, can later trigger
MoH using sendonly SDP and unhold remote
party using sendrecv SDP
- MoH covers only audio type of media sessions
- there is no specific selection of media sections
to be held, thus, if one audio media puts the
call on hold, the whole call is held
- list of parameters to be given when advertising
MoH capabilities: a sound source (file, blob or db source);
sendonly/sendrecv hold; zero-connection hold;
At least an audio file source must be given
- MoH cannot be mixed with the play media functionality,
the last one triggered will override previous one
- MoH must be unheld to stop the media being sent
towards a recipient, otherwise only a termination
of monologues will stop this packets stream
Change-Id: Iefd83ced79c14dadad936348a1d529007d6e7b3b
Move part of the `call_stop_media_ng` function body
to a separate function, to let it be available
for external function calls not particularly related
to play media NG function call.
Change-Id: I278f7bc5a6663e9232e812d10f6902616c67c497
Make most of implementations static to file
because used only locally:
- `media_player_play_file()`
- `media_player_play_blob()`
- `media_player_play_db()`
- `media_player_add_file()`
- `media_player_add_blob()`
- `media_player_add_db()`
Change-Id: I0db13e1f851e6c59d29ffb5adf5cb8d01bfd5bcc
`media_player_opts_t` is already used to pass
blob, file and db_id, hence makes no sense to pass
it one more time and reset parameters of
`media_player_opts_t` strcuture in actual implementation
to the same value again.
Change-Id: I97f4236b2c9565f12af44dc4aba85ebfc6d8cefa
Use `media_player_opts_t` object to pass file, blob and db_id
parameters via the following functions:
- `media_player_add_file()`
- `media_player_add_blob()`
- `media_player_add_db()`
Change-Id: I7612cd63d08bc00911ba68c0a5a81796d50d4722
Rename the following functions into
something more relevant so that it
doesn't correlate with the general
init function `media_player_init()`
which isn't call specific.
- `media_player_init_file()` > `media_player_add_file()`
- `media_player_init_blob()` > `media_player_add_blob()`
- `media_player_init_db()` > `media_player_add_db()`
Change-Id: I8efd877bfd4c7c300aec7efe6fbbb654f52de460
Pass file, blob and db_id via `media_player_opts_t`
structure members instead of using separate arguments
in `call_play_media_for_ml()`.
Change-Id: I8c3b9b7f5ab61238d35463c304246f31a922ac6f
Move part of the `call_play_media_ng` function body
to a separate function, to let it be available
for external function calls not particularly related
to play media NG function call.
Change-Id: Iaf4e8f72f1492446508fd6b49ba36434cae5f5f0
Turn repeat count into an int. No need for a long long.
Store start_pos in media_player.
Set start_pos and repeat count at the relevant code points once, instead
of passing it into multiple functions.
Take the opportunity to turn these shared options into a struct.
Change-Id: I758e899784fe1a6531f443d6a14fa59cf71bd4eb
Richard Fuchs
Donat Zenichev
Richard Fuchs