Track audio writes in the mix buffer to set the `active` flag to true
whenever a write occurs, which makes it possible to create the buffer in
an inactivate state and implicitly set it active on demand.
Handle the mix buffer not returning any data in the RTP sending logic
(which is what happens for an inactive buffer) by simply not sending any
packets.
Change-Id: Iaeb0f6deadb3d90020c8c62872735cc94db80504
Similar to the existing media_player, but instead of simply producing
its own standalone output media stream, the audio_player takes over the
entire media stream flowing to the receiver, including media forwarded
from the opposite side of the call, as well as media produced by the
media_player.
Change-Id: Ic34ecf08fc73b04210cfffb1a7d795b462ece5ea
Don't change to a new port for sendonly streams as this causes problems
with NAT. A device receiving a sendonly SDP with a new port won't send
any RTP to the new port, leading to a closed (non existent) NAT mapping.
Change-Id: I2ea2163eb9f1203226bd781b53f421c790a86f0a
The old port latching logic was simply to use the last (newest)
allocated endpoint_map. This turned out to be wrong, because the last
used socket on the monologue could have been one that was allocated
earlier (and older endpoint_map), as it can happen during repeated
re-invites. Add a new function to actually look for the correct
endpoint_map, matching the currently used socket, to make sure the port
doesn't change.
Change-Id: Iae768fe48539264575aed67cbbb6b08ac745130f
Defined in RFC 8842. If a tls-id was previously given and a the new SDP
shows a different tls-id or none at all, we must restart DTLS.
Relevant to #1585
Change-Id: I554234dfcacbd330c7a0c6aea68f24d0449cba21
Rename structs and variables to make it clear that these min/max values
are min/max per-sec rate values.
Carry mins and maxes separately from averages. This changes the meaning
of $command_ps_avg away from an "average of averages" to an actual
average, which is more accurate.
Calculate this average based on per-interval differences and interval
duration (stats_rate_min_max_avg_sample).
Side effect: As rtpe_latest_graphite_interval_start is now set in
print_graphite_data instead of in graphite_loop_run, the test now
reports a different "interval calls duration".
Change-Id: I67b1118c18ca2464a48c4836fca3cfdb4d53c898
Perform accumulation of stats only once (i.e. increasing an actual
counter) and report stats based on differences to previous values,
instead of carrying multiple stats counters for each metric and
resetting each counter to zero whenever stats are reported.
`rtpe_stats` is the global master accumulator.
`_intv` variables are intermediate and local storage for values sampled
from `rtpe_stats` at regular intervals.
`_rate` and `_diff` variables hold stats calculated from `rtpe_stats`
and the respective `_intv` variable whenever the sampling and reporting
occurs.
`stats_counters_calc_diff` is used to calculate stats as differences
between `rtpe_stats` and the last sampled `_intv`
`stats_counters_calc_rate` does the same but calculates a per-second
rate, based on a microsecond duration.
Eliminate now-useless struct global_stats_ax
Change-Id: Ic4ca630161787025219b67e49b41995204d60573
... so that the publishing session gets notified about "webrtcup" and
not the session which created the room.
Change-Id: If7b308df4afa7afb19ecaca1f743f87c3c736007
This is a new option flag, which provides a possiblity
to select specific crypto suite(s) for the offerer from
the given list of crypto suites received in the offer.
This will be used later on, when processing an answer from
the recipient and generating an answer to be sent out towards offerer.
Furthermore, this is being decided not when the answer is processed,
but already when the offer is processed.
Flag usage example:
`SDES-offerer_pref:AES_256_CM_HMAC_SHA;AES_256_CM_HMAC_SHA1_32;`
Change-Id: I2b22b38347d24f27331482e18b92305fbadb2520
1872 /* first add those mentioned in the order list,
1873 * but only, if they were previously generated/added to the sdes_out */
>>> CID 1530346: Control flow issues (DEADCODE)
>>> Execution cannot reach the expression "NULL" inside this statement: "l = (cpq_order ? cpq_order-...".
1874 for (GList *l = cpq_order ? cpq_order->head : NULL; l; l = l->next)
Change-Id: I58f84ba82d215a9eb6cbd97548e8e9e8a954bdc6
This is a new option flag, which provides the ordered list,
in which to add crypto suites into the SDP body.
Right now they're always added in the order given in the source code.
Flag usage example:
`SDES-order:AES_256_CM_HMAC_SHA;AES_256_CM_HMAC_SHA1_32;AES_192_CM_HMAC_SHA1_80;`
This means — those listed SDES crypto suites will be added
into the generated SDP body at the top of crypto suites list, in the given order.
But, each of them is added, only if it is about to be added/generated.
In other words, the `SDES-order:` flag itself doesn't add crypto suites,
it just affects the order of those suites to be added.
And the rest of non-mentioned suites, which are also to be added,
will be appended after those given, in the free manner of ordering.
Important thing to remember - it doesn't change the crypto suite tag
for the recipient, even though changing the order of them.
Additionally.
This flag does not contradict with `SDES-nonew`, `SDES-only-` and `SDES-no-` flags.
It just orders the list of crypto suites already prepared to be sent out.
Change-Id: I0fec54f9e2f3cd4913e905e8afe825712f82d1ae
A new function dedicated to SDES crypto suites policy checks
has been introduced: 'crypto_params_sdes_check_limitations()'.
Use it to decrease an amount of repeating code blocks
related to SDES checks.
Change-Id: I0ac242a63107a9f3a41f95a57e3d3675645ac18d
Add a new flag to only accept these individual crypto suites
and none of the others.
For example, `SDES-only-NULL_HMAC_SHA1_32`
would only accept the crypto suite `NULL_HMAC_SHA1_32` for
the offer being generated.
This also takes precedence over the `SDES-no-` flag(s),
if used together, so the `SDES-no` will be not taken into account.
This has two effects:
- if a given crypto suite was present in a received offer,
it will be kept, so will be present in the outgoing offer; and
- if a given crypto suite was not present in the received offer,
it will be added to it. The rest, which is not mentioned,
will be dropped/not added.
Flag name: 'SDES-only-<crypto name>'
Additionally: add another new flag 'SDES-nonew'.
It will not add any new crypto suites into the offer.
It takes precedence over the `SDES-no` and `SDES-only` flags,
if used in combination.
Change-Id: Ic4fa03957ee3d4d24b0c4f3fd003eada05f49b0b
Unmark a monologue that has been scheduled for deletion when it's
associated with another one, which happens during offer/answer.
Fixes a regression from 53dbef7e1 which removed this logic from
__monologue_unkernelize with re-adding it elsewhere.
Change-Id: I037162e91fec42631680f7767f58b172fd6e04db
`call_get_monologue_new` is supposed to always return a full dialogue,
but an error in invocation (using a from-tag that doesn't belong to an
offer/answer) can lead to the second half being unset. Return an error
in this case.
Change-Id: I84b21ff5e5c0403fc07cae83fee206705ecff8b3
Use the new `associated_tags` table to determine which tags are
associated with which. Iterate the associations between tags in a
tree-like manner and do this at the moment the `delete` command is
received. Break up the `associated_tags` links at this time, and
determine which tags would be left dangling and mark all of these for
deletion. If no tags are left after this process, mark the entire call
for deletion.
The previous approach was cumbersome and prone to errors. Using tag
names and branch names to determine which tags are associated with which
is a pointless hurdle, and using a table of associations that is
explicitly kept for this purpose is a much cleaner approach. Also
postponing the decision about which tags to delete until the time the
deletion actually happens can lead to tags not being deleted, when they
really should be (e.g. A -> B, delete A, A -> C).
Change-Id: I03ae57d0a2117ecd721372c1a49468fc34dd630c
Keep track which tags (monologues) were created together as part of an
offer/answer exchange with a separate hash table, regardless of whether
these monologues actually have tagged names or are just nameless
branches.
Change-Id: I60aa114c8caf6ecdff4705e3399f60190d04dda6
During offer/answer, we remove existing subscriptions before
re-establishing the new set of subscriptions. But we must also remove
the subscriptions of previous subscribers in order to keep the lists of
subscriptions and subscribers correctly reciprocal.
Change-Id: I7d39fa59892159f41033ae6a40e7cb51d861b12e
Support multiple tone frequencies for DTMF-security=tone to enable
audibly distinguishing multiple consecutive DTMF events from one
another.
Change-Id: I6fa33a5768aae198220d0b0cc4c53308c5661a52
Based on the information gotten from Richard Fuchs
document the main objects in the code, to let the code be more
understandable for other code readers.
Mainly documented:
- call
- call_monologue
- call_subscription
- call_media
- packet_stream
- stream_fd
- sink_handler
- rtpe_callhash / rtpe_callhash_lock
Change-Id: I0cf122bea2d9c3f198b48da134a70301564ff1f9
Legacy protocols don't set sp->num_ports. Use a sensible default for
this case.
Probably a regression from 2d2d7665b
Change-Id: Idcbc477a68b6db70a91a5d082736ac642c50ab15
This makes it possible to have different media silencing options for
different outputs. Functionally this commit alone is a no-op.
Change-Id: I967c3e07ea4645bb49ccb76db12d51ded2d72f06
Create a dedicated struct to hold certain attributes shared by both sink
handlers and media subscriptions, as a preparation to simplify handling
these attributs.
Change-Id: I866159c33ed6d6a2873d2cf68c4906ea705d253e
If an offer is going to a side that is already known to support
rtcp-mux, don't try to offer a fallback RTCP port. Do this by pretending
that rtcp-mux=require is set, which leads to the correct behaviour. This
is needed because the RTCP fallback port might already be closed, so
trying to include it in the offer would require opening a new set of
ports, which is undesirable.
closes#1494
Change-Id: I550bec08379c799cb7dd090a70d090ae47462467
Keep a running lifetime total of all "gauge" type metrics. Also track
the square of the sums of all "gauge" type metrics in order to determine
the standard deviation.
Change-Id: I23f60774a6421636f1a913674c7d1b54a1c5f702
When doing the initial answer, the packet_stream endpoint port isn't
filled in yet. Use the stream_params port instead to test for rejected
streams.
closes#1499
Change-Id: I8f315d95521f874fb8c5e6222263d017800b5fc9
Richard Fuchs
Donat Zenichev