New section of option flags has been introduced for SDP body
attributes manipulations.
Three levels of the SDP session are concerned:
- session level (global one)
- media level - audio
- media level - video
Three different actions are supported for now:
- add
- remove
The value of the command has a wildcard matching approach.
Other attributes apart `a=` can not be edited by this functionality.
So such headers as: `c=`, `s=`, `o=` cannot be touched.
Change-Id: I939d4582839096b2399f7ded865e91ff6eb960a4
(cherry picked from commit 3f06c18793)
Defined in RFC 8842. If a tls-id was previously given and a the new SDP
shows a different tls-id or none at all, we must restart DTLS.
Relevant to #1585
Change-Id: I554234dfcacbd330c7a0c6aea68f24d0449cba21
There's no point in sampling Graphite-specific stats, nor in reporting
them out, if Graphite is not enabled.
Change-Id: If8014513832485f38d81b478c695391129c21dff
Distinguish between two different types of "gauge" type metrics: Actual
gauges which (at least conceptually) have a single continuous value, and
metrics which are comprised of discretely sampled values, possibly from
multiple sources.
Real gauges with continuous values don't have mean/average/deviation
values directly associated with them, as calculating these requires
sampling or some other analysis.
Sampled metrics on the other hand do have these associated values.
Clarify which function does what and where each value comes from.
Change-Id: Iff5dd844b70ff70979b1b8c84dc7734d44b3da20
Rename structs and variables to make it clear that these min/max values
are min/max per-sec rate values.
Carry mins and maxes separately from averages. This changes the meaning
of $command_ps_avg away from an "average of averages" to an actual
average, which is more accurate.
Calculate this average based on per-interval differences and interval
duration (stats_rate_min_max_avg_sample).
Side effect: As rtpe_latest_graphite_interval_start is now set in
print_graphite_data instead of in graphite_loop_run, the test now
reports a different "interval calls duration".
Change-Id: I67b1118c18ca2464a48c4836fca3cfdb4d53c898
Perform accumulation of stats only once (i.e. increasing an actual
counter) and report stats based on differences to previous values,
instead of carrying multiple stats counters for each metric and
resetting each counter to zero whenever stats are reported.
`rtpe_stats` is the global master accumulator.
`_intv` variables are intermediate and local storage for values sampled
from `rtpe_stats` at regular intervals.
`_rate` and `_diff` variables hold stats calculated from `rtpe_stats`
and the respective `_intv` variable whenever the sampling and reporting
occurs.
`stats_counters_calc_diff` is used to calculate stats as differences
between `rtpe_stats` and the last sampled `_intv`
`stats_counters_calc_rate` does the same but calculates a per-second
rate, based on a microsecond duration.
Eliminate now-useless struct global_stats_ax
Change-Id: Ic4ca630161787025219b67e49b41995204d60573
Use dedicated functions and different code paths for the different use
cases, instead of just a single function which does if/else all the
time.
Change-Id: Ic3ab928c3605cfe4a2f48889e95a3a1ddccdbbec
The SRTP decryption context is associated with the local socket. Use the
socket that a packet was actually received on for the decryption context
instead of using the one that it was expected to be received on.
Change-Id: Iddf400a440fc51b4afb370ec827f75e9626b2cfd
(cherry picked from commit 8c3452e50b)
... so that the publishing session gets notified about "webrtcup" and
not the session which created the room.
Change-Id: If7b308df4afa7afb19ecaca1f743f87c3c736007
This is a new option flag, which provides a possiblity
to select specific crypto suite(s) for the offerer from
the given list of crypto suites received in the offer.
This will be used later on, when processing an answer from
the recipient and generating an answer to be sent out towards offerer.
Furthermore, this is being decided not when the answer is processed,
but already when the offer is processed.
Flag usage example:
`SDES-offerer_pref:AES_256_CM_HMAC_SHA;AES_256_CM_HMAC_SHA1_32;`
Change-Id: I2b22b38347d24f27331482e18b92305fbadb2520
Split out the logic to determine the destination payload type into a
separate functions. This makes it possible to supply a different, or
pre-determined, payload type instead.
Change-Id: I9b67b29cafc0c6ce4e18eede64dea3d1973f8b63
This is a new option flag, which provides the ordered list,
in which to add crypto suites into the SDP body.
Right now they're always added in the order given in the source code.
Flag usage example:
`SDES-order:AES_256_CM_HMAC_SHA;AES_256_CM_HMAC_SHA1_32;AES_192_CM_HMAC_SHA1_80;`
This means — those listed SDES crypto suites will be added
into the generated SDP body at the top of crypto suites list, in the given order.
But, each of them is added, only if it is about to be added/generated.
In other words, the `SDES-order:` flag itself doesn't add crypto suites,
it just affects the order of those suites to be added.
And the rest of non-mentioned suites, which are also to be added,
will be appended after those given, in the free manner of ordering.
Important thing to remember - it doesn't change the crypto suite tag
for the recipient, even though changing the order of them.
Additionally.
This flag does not contradict with `SDES-nonew`, `SDES-only-` and `SDES-no-` flags.
It just orders the list of crypto suites already prepared to be sent out.
Change-Id: I0fec54f9e2f3cd4913e905e8afe825712f82d1ae
A new function dedicated to SDES crypto suites comparison.
It compares the crypto suites using a name in 'str' format.
Recommended to be used in combination with:
g_queue_find_custom() or g_list_find_custom()
Change-Id: I08ff6d3304f74d29154110caa472618478ca1837
A new function dedicated to SDES crypto suites policy checks
has been introduced: 'crypto_params_sdes_check_limitations()'.
Use it to decrease an amount of repeating code blocks
related to SDES checks.
Change-Id: I0ac242a63107a9f3a41f95a57e3d3675645ac18d
Add a new flag to only accept these individual crypto suites
and none of the others.
For example, `SDES-only-NULL_HMAC_SHA1_32`
would only accept the crypto suite `NULL_HMAC_SHA1_32` for
the offer being generated.
This also takes precedence over the `SDES-no-` flag(s),
if used together, so the `SDES-no` will be not taken into account.
This has two effects:
- if a given crypto suite was present in a received offer,
it will be kept, so will be present in the outgoing offer; and
- if a given crypto suite was not present in the received offer,
it will be added to it. The rest, which is not mentioned,
will be dropped/not added.
Flag name: 'SDES-only-<crypto name>'
Additionally: add another new flag 'SDES-nonew'.
It will not add any new crypto suites into the offer.
It takes precedence over the `SDES-no` and `SDES-only` flags,
if used in combination.
Change-Id: Ic4fa03957ee3d4d24b0c4f3fd003eada05f49b0b
Add a flag to force increasing the SDP version,
even if the SDP hasn't been changed.
And cover it with tests.
Flag name: 'force-increment-sdp-ver'
Additionally fix the name of the 'sdp-version' flag
in the 'rtpengine-ng-client' tool.
Change-Id: I466792668b0cd313b5e21b248dd14cd599333cbd
Donat Zenichev
Richard Fuchs