Transcoding is flow-specific, so it doesn't make sense to have a flag
for it in a call_media section. Instead we use the transcoding flag set
on the call_subscription objects (on subscribers), and set/unset a flag
on the monologue struct, depending on whether any media flows (going to
subscribers) have transcoding enabled.
Change-Id: Id671d56e56a22eaa8e56f6d449770b0c7b086cea
Pass the subscription object to codec_handlers_update to eliminate the
need for a return type and the subsequent if/else.
Change-Id: I311b3e8ca14ee5090cf329163975354385cee800
Do a direct lookup of the call subscription object and set the
transcoding flag directly. Remove obsolete function.
Change-Id: I8b8329e53afb641fad80d38b45120efd46c408db
This is a convenience function that does an unnecessary loop iteration.
We have a hash table to perform the exact lookup needed. Turn the
function into a simple wrapper which uses the hash table.
Change-Id: If91976a955dea80e882656849b0b13d426e5748f
We have the subscription objects available now, so we can directly set
the transcoding flag without having to do a hash table lookup.
Change-Id: I2b85f34ca4d03dfaf81d92ea252902d1ee194efd
Instead of just return the monologues involved in an offer/answer,
return the respective subscription objects that have the monologues
pointing to each other. This makes it possible to set flags within these
objects.
Change-Id: Id88e56e1bf164a75e2172d0df04316cde5d8a955
Deprecate increasing/decreasing functionality of
the call timer run duration, because it's not needed anymore,
most of the unnecessary functionality has been moved lately
to separate dedicated threads and the `call_timer`
is simply unloaded for now.
Additionally: remove logging with timestamps, because
we do not need to monitor it anymore.
Change-Id: I8d1fd260472528fcee6a12f48b9a92f195893787
Move the `ice_slow_timer()` functionality to a separate thread,
so that we do the work more efficiently, and not be dependent
on the call_timer runs by poller.
Furthermore it makes more sense to keep in the `ice.c`,
since it obviously has to do with ice timing.
Additionally:
Update the test-stats due to these changes in the `call_timer()`
We have to call the `ice_slow_timer()` now explicitely from
the test-stats.c, because the `call_timer()` is not anymore
responsible for providing stats counters rate calculations.
Change-Id: I03377dd59ea71c27497e1f4d30164075f05165cd
Similarly as for the `stats_rate_min_max()`,
move the `stats_counters_calc_rate()` functionality
to the same separate thread, so that we do the work
more efficiently and not be dependent on the call_timer
runs by poller.
Furthermore it makes more sense to keep in the `statistics.c`,
since it obviously has to do with statistics.
Additionally:
Update the test-stats due to these changes in the `call_timer()`
We have to call the `stats_counters_calc_rate()` now explicitely from
the test-stats.c, because the `call_timer()` is not anymore
responsible for providing stats counters rate calculations.
Change-Id: I1682eb76e3057f0f431c27b9633717d965313a1a
To do the work more efficiently,
and not be dependent on the call_timer runs by poller,
we should move the ports iterations (stats update from the kernel)
functionality to a separate thread, to make it faster and
not be dependent on what happens in the `call_timer` at all.
Since it has nothing to do with the call timers.
As an additional benefit: we unload the `call_timer` runner.
Change-Id: I511529ce504ef3d29f4e9d6d731ffd470d78d27a
To do the work more efficiently,
and not be dependent on the call_timer runs by poller,
we should move the `stats_rate_min_max()` to a separate thread,
to make it faster and not be dependent on what happens in the `call_timer` at all.
Since it has nothing to do with the call timers.
Change-Id: I9a39e1b63cb8741377f5af5b2d52d4f8b428a0ad
To do the work more efficiently and not be dependent on
the `call_timer` runs by poller, we should move
the releasing of sockets to a separate thread, to make it
faster and not be dependent on what happens in the `call_timer`
at all. Since it has nothing to do with the call timers.
Since now we have two queues:
- thread scope (local): ports_to_release
- global one: ports_to_release_glob
`sockets_releaser()` uses the ports_to_release_glob,
meanwhile appending in the `call_timer()` happens using the
ports_to_release.
Change-Id: Iadd966ac895b2dd64f81269d4fdf5d83747fe0b7
Deprecate usage of the bit flags for return.
And instead do:
- only return true/false for the redis update
- check if we have to destroy the whole call using the
`call_monologues_associations_left()` only
Additionally remove unused variables.
Change-Id: Ie858c533d1aa4b74024d65c7064aa56437389882
Check globally left monologues (with associations left) after
the `monologue_delete_iter()` has already done its job.
This is needed to prevent cases, when a recursive call of the
`monologue_delete_iter()` leads to blocking of the whole call
destorying, meanwhile it's required, e.g.:
- A is in progress of destorying
- B gets recursive call of `monologue_delete_iter()` and sees
that A has still one association left with C, which A simply
hasn't manage to remove yet.
This commit introduces new function: `call_monologues_associations_left()`
Change-Id: I0941c18a76fa8c2a78d3864aee9e6433283bec88
This commit: 6f0ad0db0f
introduced an improved behavior of the call deconstruction
when dealing with multiple forked legs. But it also
introduced a regression related to TPCC related calls.
This is because it takes into consideration existing
`->viabranches`, which is not efficient in certain cases.
Instead, we just have to ensure, whether there are
other monologues of the call object, which are not directly
"visible" for this branch being cancelled (so they are not directly
associated to that), but they might have own associations
present, which means the call mustn't be globally destoroyed.
Change-Id: I630f2d88ef3b557af3a95816fc2703daccaff374
Upon calling the `monologue_delete_iter()`, we have to take into account
an amount of forked legs we have now entirely in the call.
If there's more than 1 forked leg, don't mark the whole call for a full destruction,
since other forks might be successful (and they are not in a scope of processing now).
Only destroy this branch and associated to it monologue(s).
Change-Id: I6fdb4ba33ae7582578d84d57d91f9536d932ca47
When the `discard-recording` flag is given in one of the commands to
rtpengine (e.g. in the `delete` command), the metafile is renamed to a
.DISCARD suffix and then deleted.
The recording daemon then, seeing the .DISCARD suffix, proceeds to
immediately close all recordings, delete the files if any, and delete
the entries from the DB.
Change-Id: I3f0cac129f2d56cbccd770d43bf434dea6c0a0db
Rename the original call_delete_branch() to call_delete_branch_by_id()
and provide a new call_delete_branch() which takes a reference to a call
object instead of a call ID.
Change-Id: Ie549e7f550fab5edc6e81472e78565e1925fae67
Move trickle ICE handling out of __media_init_from_flags and into a
higher-level function. This obsoletes the special magic return value to
indicate a trickle ICE failure.
All methods accepting trickle ICE updates must now explicitly call the
trickle ICE update function.
The requirement to have a full dialogue for trickle ICE updates is
removed as trickle ICE only affects one side.
Change-Id: I0850e1858876ca7bcdd39b7144b53b5a4afed53e
Moving code for handling (queuing, dequeuing) trickle ICE fragments into
ice.c, where it makes no sense. No functional changes.
Change-Id: Ib68f82e8d58efe066fdc48cd32ca9869cdeab846
This is slightly more performant as it does the retrieval and removal
with just one lookup instead of two.
Change-Id: Iba702704218ac4689a6788fd23a792ad40460ea8
We're also in controlling role for subscribe answers.
Make sure we don't clobber the source media's ICE options when adding a
subcriptions.
Change-Id: I5361462aefdbbe6411841332b69a8dc4b0e1e013
Using a pointer array instead of a linked lists allows us to directly
reference a media section by index number, without having to spool into
the linked list.
No functional changes.
Change-Id: I8b0e93f0c2e9addbcb4c938894118ed4a6aec768
If a subscribe answer says that it doesn't want to receive any media
(i.e. `inactive` - `recv` flag unset), clear our corresponding `send`
flag so that we actually don't send media there.
Change-Id: I8862cc6f4121a82c723a8303ba70345d064cd243
... which is the more direct way to copy a bit flag in a mirror fashion,
instead of doing an if/else.
Change-Id: I7283d31f7a44e6bf1ee15ea1c14cb3b8fe0293b9
Track audio writes in the mix buffer to set the `active` flag to true
whenever a write occurs, which makes it possible to create the buffer in
an inactivate state and implicitly set it active on demand.
Handle the mix buffer not returning any data in the RTP sending logic
(which is what happens for an inactive buffer) by simply not sending any
packets.
Change-Id: Iaeb0f6deadb3d90020c8c62872735cc94db80504
Similar to the existing media_player, but instead of simply producing
its own standalone output media stream, the audio_player takes over the
entire media stream flowing to the receiver, including media forwarded
from the opposite side of the call, as well as media produced by the
media_player.
Change-Id: Ic34ecf08fc73b04210cfffb1a7d795b462ece5ea
Don't change to a new port for sendonly streams as this causes problems
with NAT. A device receiving a sendonly SDP with a new port won't send
any RTP to the new port, leading to a closed (non existent) NAT mapping.
Change-Id: I2ea2163eb9f1203226bd781b53f421c790a86f0a
The old port latching logic was simply to use the last (newest)
allocated endpoint_map. This turned out to be wrong, because the last
used socket on the monologue could have been one that was allocated
earlier (and older endpoint_map), as it can happen during repeated
re-invites. Add a new function to actually look for the correct
endpoint_map, matching the currently used socket, to make sure the port
doesn't change.
Change-Id: Iae768fe48539264575aed67cbbb6b08ac745130f
Defined in RFC 8842. If a tls-id was previously given and a the new SDP
shows a different tls-id or none at all, we must restart DTLS.
Relevant to #1585
Change-Id: I554234dfcacbd330c7a0c6aea68f24d0449cba21
Rename structs and variables to make it clear that these min/max values
are min/max per-sec rate values.
Carry mins and maxes separately from averages. This changes the meaning
of $command_ps_avg away from an "average of averages" to an actual
average, which is more accurate.
Calculate this average based on per-interval differences and interval
duration (stats_rate_min_max_avg_sample).
Side effect: As rtpe_latest_graphite_interval_start is now set in
print_graphite_data instead of in graphite_loop_run, the test now
reports a different "interval calls duration".
Change-Id: I67b1118c18ca2464a48c4836fca3cfdb4d53c898
Perform accumulation of stats only once (i.e. increasing an actual
counter) and report stats based on differences to previous values,
instead of carrying multiple stats counters for each metric and
resetting each counter to zero whenever stats are reported.
`rtpe_stats` is the global master accumulator.
`_intv` variables are intermediate and local storage for values sampled
from `rtpe_stats` at regular intervals.
`_rate` and `_diff` variables hold stats calculated from `rtpe_stats`
and the respective `_intv` variable whenever the sampling and reporting
occurs.
`stats_counters_calc_diff` is used to calculate stats as differences
between `rtpe_stats` and the last sampled `_intv`
`stats_counters_calc_rate` does the same but calculates a per-second
rate, based on a microsecond duration.
Eliminate now-useless struct global_stats_ax
Change-Id: Ic4ca630161787025219b67e49b41995204d60573
... so that the publishing session gets notified about "webrtcup" and
not the session which created the room.
Change-Id: If7b308df4afa7afb19ecaca1f743f87c3c736007
Richard Fuchs
Donat Zenichev
Stefan Mititelu