This triggers an initial "no carrier" indication if the sender is slow
to start PCM.
Change-Id: I3513efafae06f992b3c9abd58b8ec797320c3b56
(cherry picked from commit dafb68ef80)
Use the correct media object (the source media) to obtain media-level i=
lines from. Adapt OSRTP output function to do the same.
Change-Id: I9ba4db286cf9d822b8986a7da2cb4f4aa1c69646
(cherry picked from commit 3385191049)
Grab source monologue and source media only once, and pass the object
down to the various functions, instead of doing the retrieval several
times in multiple places.
Change-Id: I88d019dbf9493fa0037161390fdb9efda58f5441
(cherry picked from commit cabd5e4676)
We know whether we're printing for monologues or for medias, so there's
no need to have a generic function signature.
Change-Id: I356747686adb34c19ba2ba4c77c2d0a77b85a364
(cherry picked from commit e0e4ba5b7c)
This is a normal condition for a first offer. Reduce log level to debug.
NGCP-Flow: mr13.1
Change-Id: I785cee82ead90b1e797c09017c3e3a77da113553
(cherry picked from commit d483ef185b)
If the receiver of a previously passthrough T.30 stream gets switched to
a generated PCM stream from a T.38 gateway, continue the sequencing of
the previous SSRC. Technically this is not necessary as the generated
PCM stream gets a new SSRC, but at least Asterisk seems to ignore this
and expect sequencing to continue, and will ignore PCM if the sequence
jump is too large.
Change-Id: Ia4656770db11f5fa1a1e9bf5bd71a0398deb1e00
(cherry picked from commit 18579227a9)
Add a simple function that acts as an encryption callback to just update
the ext_seq (index) of the egress SSRC context. The kernel module
already does this, but the daemon only did it when SRTP was involved.
This now tracks egress packet indexes in all cases.
Change-Id: I9460744de55ead4b05aceb322fd8482442ff2b41
(cherry picked from commit 0da49000ba)
Some components (the timer thread used by the codec handlers in
particular) may hold references to components owned by the codeclib (the
.so handles in particular). Move codeclib cleanup towards the end.
Change-Id: Ic581588c27b69c025576c14a69e999c9ca5d1597
(cherry picked from commit 43cc9cc06d)
Fixes a corner case that happens when trying to delete a call created with
ng offer and no-redis-update flag and for which no ng answer was received.
In such cases, one would receive warning messages from Redis
"ERR DB index is out of range".
What happens is that on call creation redis_hosted_db defaults to -1. This
value is changed when writing to Redis, but the writing is not done for a
ng offer with no-redis-update.
Kudos go to Pawel Kuzak.
Closes#1910
Change-Id: Iad19ec8ac69b169e6352662697b17eb23e6970fb
(cherry picked from commit bba9625b25)
These are potentially computed from inside each subdir, and in addition
due to what appears to be a regression in GNU make 4.4, where it is
reevaluating variables that contain $(shell) functions, many times (in
the order of thousands, this was slowing down the build, were on the
Debian amd64 build daemons it went from 5m with GNU make 4.3 to 2h40m
with GNU make 4.4. Although the bulk of the slow down has been fixed
with previous commits, the remaining optimizations are only to avoid
this potentially happening again in the future, and to reduce useless
duplicate work.
Instead of trying to cache the values from within make itself, where
programming this there is extremely painful, and does not seem to be
able to greatly reduce the number of calls, because the build system
is going to be called multiple times for different targets. Simply
externalize the generation into several shell scripts, that we call
to generate a make fragment that then we include from the various
Makefiles.
For a Debian build with GNU make 4.3, this reduces the amount of total
pkg-config calls from around ~1600 to 128, for dpkg-buildflags from
~1100 down to 6, and for dpkg-parsechangelog from ~56 to 17, but the
slow down is not as significant there anyway.
For a Debian build with GNU make 4.4, this reduces the amount of total
pkg-config calls from around ~2600 to 128, for dpkg-buildflags from
~2800 down to 6, and for dpkg-parsechangelog from ~350 to 21.
For a Debian build with GNU make 4.4, this reduces the build time
on this system from 2m10s to ~ 1m30s.
Change-Id: I427d0ea5106dc6ed1ff9e664ccdba2fa0725b7d0
(cherry picked from commit 7dbe24e4e5)
Starting with GNU make 4.4, build time have massively regressed
where before they would take 5m on amd64 now can take 2h40m. While this
seems clearly broken, the release notes are filled with notices for
breaking changes, and in particular the one for passing all make
variables down to the invoked programs executed via the «shell» GNU make
function, so it is not clear what is expected breakage and what is not.
This has been reported in Debian, but not yet upstream, and while it
seems like a clear regression, it's not clear what will be the upstream
take on it. For now apply workarounds that do not change semantics, and
which do not regress with older GNU make versions.
Use the GNU make «origin» function instead of «?=» which defaults to
defining a variable as a recursive one. Coerce already defined variables
into simple ones to avoid GNU make re-evaluating these variables for
each «shell» function invocation.
Ref: https://bugs.debian.org/1092051
Change-Id: I076fc05dd616918473a22e7e942fecfdc9851d47
(cherry picked from commit 887fb40f3f)
Make sure we properly return a failure if no supported payload type is
present.
Change-Id: Ia483e0819b2d8ca0c2c5184c929dfe3d05c96ca1
(cherry picked from commit 5f6609de5d)
Make sure a codec is not only known to us, but that it can actually be
used, in places where it makes sense. This is partially redundant
because ensure_codec_def_type already takes care of this, but a codec
definition may come from a different source, so it doesn't help to
double check.
Change-Id: I91af84afc2477840f1400674b2538ad8fb7746ee
(cherry picked from commit 7b60e85970)
Deleting a call can have the side effect of changing the active Redis DB
on the writing instance. Restore the correct DB afterwards if needed.
Fixes#1905
Change-Id: I12dae767ffa5d25703e024d2ec59aa21ba9da101
(cherry picked from commit fdabc9b59e)
A call that gets created but then doesn't get initialised would have its
Redis DB left at zero. At destruction it would then try to switch to DB
zero. Fix this by using an appropriate initial value.
Closes#1905
Change-Id: I852e48c5a06b732b37d2ccd5c478de4760aacd4e
(cherry picked from commit add46f265a)
If keyspace notifications are used at all, the respective objects and
threads must be created during startup. This requires at least some
keyspace to be configured. To support usage without any keyspaces
initially (and add them during runtime), add a special case (set
keyspace to -1).
Convert all keyspace variables to signed ints. Ignore negative keyspace
numbers where appropriate. Support Redis endpoint addresses without
database number.
Fixes#1902
Change-Id: I45a3c87bc515f9b14e64ec1ec0906dde271b5f8d
(cherry picked from commit fb1ad3f0cf)
If keyspace notifications are not configured at all, bail with an error
when there is an attempt to add a new keyspace or remove one. We get a
segfault otherwise.
Closes#1902
Change-Id: Ie47cf5f7762792aabe38476739f0dcf9927787ce
(cherry picked from commit 6dbf098bc7)
Avoids segfault is extra connection can't be established
Closes#1903
Change-Id: I6eb7315f6774015703c7ad036e08596f7f550d60
(cherry picked from commit 172f389395)
A matching payload type number in an answer might not be enough to
establish compatible codecs. Also check the format parameters. Reject
and ignore answer codecs that are not compatible.
Change-Id: I12a1287216886926ec4b3c704029c923f815b429
(cherry picked from commit 9c00f30475)
HTTP/WS init creates worker threads, which would be terminated by a fork
to background. Reverse the order.
Closes#1896
Possibly also relevant to #1895
Change-Id: I30b61e07ad3bed41b6b241e8943ed479277c1474
(cherry picked from commit dd04af1163)
Some compilers seem to think that there is some uninitialised usage
here. Work around this.
Closes#1891
Change-Id: Ic97a4b589fd2a0c33418a209557b7ce29009c7bf
(cherry picked from commit 4b614d8ce0)
If recording-method is pcap, then proc is zero-initialized, so
meta_filepath is empty. This shows many logs such as:
[core] Failed to open recording metadata file '(null)' for writing: Bad address
Prevent them by returning earlier.
Closes#1889
Change-Id: Ifeb3038f9a5c0bd6a9b7dd92842dd61783b40263
(cherry picked from commit 759fd72dc6)
Fixes regression from the SDP printing rework.
Fixes#1885
(We should add tests for this...)
Change-Id: I2154cd61fbe4a0c9bf63a25128f038068acffa0a
(cherry picked from commit 1a1eaab50b)
Use an object with local storage for sdp_address instead of just setting
a pointer. This makes it possible to put a different address.
Change-Id: I92e69b6a9eba9d0caa3853b3dcb134951d76b145
(cherry picked from commit a733a8c83a)
There is enough overlap between the two enums that it doesn't make sense
to carry along both. Unify.
Change-Id: I9de8fbdb8d78a2002d8c1b62cea57188c937d61d
Allow to-tag updates in answers only until a non-provisional response is
received. Add a flag to optionally suppress this feature.
Change-Id: I67110ede662f618ba5a355500d3d84050e6318cc
If we receive an answer from a to-tag that hasn't previously seen and no
corresponding monologue exists (created from a previous offer),
previously we would treat this is a separate and new call branch, create
a brand new monologue and dissociate the previous one. This may lead to
unexpected results as this new monologue has been created without the
same initialisation as was done for the original one, and so may be left
with incorrect or incomplete data (e.g. SRTP keys, codec information,
interface bindings, etc).
Improve this by treating an unexpected and unseen to-tag as an alias to
the already existing to-tag. Going forward both tags can be used
interchangeably to refer to the same monologue.
Add a flag to suppress this new behaviour, in case some situation is
made worse by it.
Change-Id: Ie8f838eebd50d29d3549031998a2eb1f610b04bb
Richard Fuchs
Lucian Balaceanu
Guillem Jover
Donat Zenichev
Orgad Shaneh