# For more information on configuring rtpengine see
# http://github.com/sipwise/rtpengine
# main config file
CONFIG_FILE=/etc/rtpengine/rtpengine.conf
# pid
#PIDFILE=/run/ngcp-rtpengine-daemon.pid
# iptables table for in-kernel forwarding rules. Ignored if "KERNEL=no"
#TABLE=0
# "yes" enables fallback to userspace forwarding only.
#FALLBACK=yes
# Local IPv4/6 address for RTP. The format of the value is [NAME/]IP[!IP].
#RTP_IP[0]=127.0.0.1

# At least one of LISTEN_(TCP|UDP|NG) is required
# IP address and port combination for TCP control
#LISTEN_TCP=127.0.0.1:2222
# IP address and port combination for UDP control
#LISTEN_UDP=127.0.0.1:2222
# IP address and port combination for NG (UDP) control
#LISTEN_NG=127.0.0.1:2223
#LISTEN_CLI=127.0.0.1:9900

# TOS value to use in outgoing packets
#TOS=184
# Number of seconds after which a media stream is considered dead if there is no traffic. Default: 60
#TIMEOUT=60
# Number of seconds after which a muted or inactive stream is considered dead. Default: 3600
#SILENT_TIMEOUT=3600
# Lowest port in the local port range for media traffic. Default: 30000
#PORT_MIN=30000
# Highest port in the local port range for media traffic. Default: 40000 
#PORT_MAX=40000

#
# Log level to use
#LOG_LEVEL=6
# Syslog facility to use
#LOG_FACILITY=daemon
# Syslog facility to write CDRs
#LOG_FACILITY_CDR=daemon
# How many worker threads to launch
#NUM_THREADS=5
# Delay to delete session from memory
#DELETE_DELAY=30

# The following items are for use with NGCP
#REDIS=127.0.0.1:6379
#REDIS_DB=0
#B2B_URL=http://127.0.0.1:8080/xmlrpc

# User
# Run rtpengine as this specific user
#SET_USER=ngcp-rtpengine
# allow this group to control rtpengine in kernel mode
#SET_GROUP=ngcp-rtpengine

# Address of Homer server for RTCP stats
#HOMER=127.0.0.1:9060
# Transport protocol for Homer (default udp)
#HOMER_PROTO=udp
# 'Capture ID' to use within the HEP protocol
#HOMER_ID=1234
# TCP address of graphite statistics server
#GRAPHITE=127.0.0.1:2003
# Graphite data statistics send interval
#GRAPHITE_INTERVAL=60
# Graphite prefix for every line
#GRAPHITE_PREFIX=STRING