# For more information on configuring rtpengine see
# http://github.com/sipwise/rtpengine

CONFIG_FILE=/etc/rtpengine/rtpengine.conf # main config file
#PIDFILE=/var/run/ngcp-rtpengine-daemon.pid # pid
#TABLE=0			# iptables table for in-kernel forwarding rules. Ignored if "KERNEL=no"
#FALLBACK=yes		# "yes" enables fallback to userspace forwarding only.
#RTP_IP[0]=127.0.0.1	# Local IPv4/6 address for RTP. The format of the value is [NAME/]IP[!IP].

# At least one of LISTEN_(TCP|UDP|NG) is required
#LISTEN_TCP=127.0.0.1:2222	# IP address and port combination for TCP control
#LISTEN_UDP=127.0.0.1:2222	# IP address and port combination for UDP control
#LISTEN_NG=127.0.0.1:2223 	# IP address and port combination for NG (UDP) control
#LISTEN_CLI=127.0.0.1:9900

#
#TOS=184		# TOS value to use in outgoing packets
#TIMEOUT=60		# Number of seconds after which a media stream is considered dead if there is no traffic. Default: 60
#SILENT_TIMEOUT=3600	# Number of seconds after which a muted or inactive stream is considered dead. Default: 3600
#PORT_MIN=30000		# Lowest port in the local port range for media traffic. Default: 30000
#PORT_MAX=40000		# Highest port in the local port range for media traffic. Default: 40000 

#
#LOG_LEVEL=6		# Log level to use
#LOG_FACILITY=daemon    # Syslog facility to use
#LOG_FACILITY_CDR=daemon        # Syslog facility to write CDRs
#NUM_THREADS=5		# How many worker threads to launch
#DELETE_DELAY=30        # Delay to delete session from memory

# The following items are for use with NGCP
#REDIS=127.0.0.1:6379
#REDIS_DB=0
#B2B_URL=http://127.0.0.1:8080/xmlrpc

# User
#SET_USER=ngcp-rtpengine	# Run rtpengine as this specific user
#SET_GROUP=ngcp-rtpengine	# allow this group to control rtpengine in kernel mode

#HOMER_SERVER=127.0.0.1:9060	# Address of Homer server for RTCP stats
#HOMER_PROTO=udp		# Transport protocol for Homer (default udp)
#HOMER_CAPTURE_ID=1234		# 'Capture ID' to use within the HEP protocol