From ce8c0a7d21635a3118babb5a158af415874e4405 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Piotr=20Wilko=C5=84?= Date: Thu, 16 May 2024 09:30:04 +0200 Subject: [PATCH] default uart params and backspace handling --- doc/manual.md | 14 +++++++++++++- 1 file changed, 13 insertions(+), 1 deletion(-) diff --git a/doc/manual.md b/doc/manual.md index 793d62a..4dffe71 100644 --- a/doc/manual.md +++ b/doc/manual.md @@ -1,5 +1,5 @@ # VP-Digi - documentation -Copyright 2023 Piotr Wilkoń\ +Copyright 2023-2024 Piotr Wilkoń\ Permission is granted to copy, distribute and/or modify this document under the terms of the GNU Free Documentation License, Version 1.3 or any later version published by the Free Software Foundation; with no Invariant Sections, no Front-Cover Texts, and no Back-Cover Texts. A copy of the license is available under [LICENSE_FDL](LICENSE_FDL).\ The changelog is placed at the bottom of this document. ## Table of contents @@ -73,6 +73,16 @@ Each port operates independently and can function in the following modes: ## 2. User manual ### 2.1. Configuration mode Device configuration can be done through any port (USB, UART1, UART2). To enter configuration mode, use the `config` command. + +UART ports operate with the following parameters: +- Baudrate: 9600 Bd +- Data bits: 8 +- Stop bits: 1 +- Parity control: none + +In the case of a USB port, these settings do not matter. +_Backspace_ must be encoded as _Control+H_ (standard backspace, ASCII code 8). + > Note! If the port is in KISS mode (default after startup), the entered characters will not be visible. > Note! After completing the configuration, remember to save it to memory using the `save` command. @@ -340,6 +350,8 @@ If *viscous delay* functionality is enabled for the matched alias, the completed In addition, the *viscous delay* buffer is regularly refreshed. If the specified time has passed, and the packet has not been removed from the buffer (see *the beginning of this section*), its hash is saved to the duplicate filter buffer, the packet is transmitted, and removed from the *viscous delay* buffer. ## 4. Documentation changelog +### 2024/05/16 +- Default UART parameters and backspace handling - Piotr Wilkoń ### 2023/11/12 - Note for output path capacitor - Piotr Wilkoń ### 2023/11/07