diff --git a/kamailio/local.cfg b/kamailio/local.cfg
index c9fae27..af4349f 100644
--- a/kamailio/local.cfg
+++ b/kamailio/local.cfg
@@ -6,16 +6,13 @@ debug = L_INFO
 ################################################################################
 ## ROLES
 ################################################################################
-## NOTE: Remove all but the last '#' to
-##     enable the named roled
-
 ## Enabled Roles
 #!trydef DISPATCHER-ROLE
 #!trydef NAT-TRAVERSAL-ROLE
 #!trydef REGISTRAR-ROLE
 #!trydef PRESENCE-ROLE
 
-## Disabled Roles
+## Disabled Roles - remove all but the last '#' to enable
 # # #!trydef TRAFFIC-FILTER-ROLE
 # # #!trydef WEBSOCKETS-ROLE
 # # #!trydef TLS-ROLE
@@ -23,42 +20,56 @@ debug = L_INFO
 ################################################################################
 ## SERVER INFORMATION
 ################################################################################
-## NOTE: Change this to your servers hostname
+## CHANGE "kamailio.2600hz.com" TO YOUR SERVERS HOSTNAME
 #!substdef "!MY_HOSTNAME!kamailio.2600hz.com!g"
 
-## NOTE: Change this to the IP address Kamailio
-##     should use, usually your public IP.  If
-##     you need to listen on addtional ports or
-##     IPs add them in "Additional Binding Parameters".
+## CHANGE "127.0.0.1" TO YOUR SERVERS IP ADDRESS
+##     Usually your public IP.  If you need
+##     to listen on addtional ports or IPs
+##     add them in "BINDINGS" at the bottom.
 #!substdef "!MY_IP_ADDRESS!127.0.0.1!g"
 
-## NOTE: Change this to the AMQP URL of the
-##     primary RabbitMQ server in the zone
-##     that this server will service.
+## CHANGE "kazoo://guest:guest@127.0.0.1:5672" TO THE AMQP URL
+##     This should be the primary RabbitMQ server 
+##     in the zone that this server will service.
 #!substdef "!MY_AMQP_URL!kazoo://guest:guest@127.0.0.1:5672!g"
 
-## NOTE: This parameter is only required if you are
-##     using websockets.  This value must be present
-##     in the HTTP Origin header on a new websocket
-##     request or it will be rejected.
+## This parameter is only required if you are using websockets
+##     This value must be present in the HTTP 
+##     Origin header on a new websocket request
+##     or it will be rejected.  If you remove
+##     it completely the validation will be disabled.
 #!substdef "!MY_WEBSOCKET_DOMAIN!2600hz.com!g"
 
 ################################################################################
 ## UDP PARAMETERS
 ################################################################################
-## NOTE: This parameter is OPTIONAL, but if your
-##     UDP packets are dropped due to MTU you can
-##     try uncomment this option.  However, you 
-##     MUST match this to your network adapter!
-##     If they do not match, all UDP packets over
-##     this limit WILL FAIL!
+## This parameter is OPTIONAL
+##     If large UDP packets are dropped by the
+##     interface try uncommenting this option.
+##     However, you MUST match this to your 
+##     network adapter!  If they do not match,
+##     all UDP packets over this limit WILL FAIL!
 ##     E.g.: Add MTU=1472 to the /etc/sysconfig/network-scripts/XXX
 # udp4_raw_mtu = 1472
 
 ################################################################################
 ## BINDINGS
 ################################################################################
-## NOTE: You should not have to change these definitions
+## This parameter is OPTIONAL.
+##     It will try to locate outbound interface 
+##     on multihomed host.  By default forward
+##     requests use the incoming socket disregarding
+##     the destination location. When enabled Kamailio
+##     will select a socket that can reach the
+##     destination. This reduces performance.
+mhomed=0
+
+## YOU SHOULD NOT HAVE TO CHANGE THESE!
+##     By setting MY_IP_ADDRESS above these will resolve
+##     to the proper bindings.  These are here
+##     for those with complex layouts who know
+##     what they are doing :)
 #!substdef "!UDP_SIP!udp:MY_IP_ADDRESS:5060!g"
 #!substdef "!TCP_SIP!tcp:MY_IP_ADDRESS:5060!g"
 #!substdef "!TLS_SIP!tls:MY_IP_ADDRESS:5061!g"
@@ -66,23 +77,15 @@ debug = L_INFO
 #!substdef "!TCP_AGL_SIP!tcp:MY_IP_ADDRESS:7000!g"
 #!substdef "!TLS_AGL_SIP!tls:MY_IP_ADDRESS:7001!g"
 #!substdef "!TCP_WS!tcp:MY_IP_ADDRESS:8080!g"
-#!substdef "!TLS_WS!tcp:MY_IP_ADDRESS:8081!g"
-
-## NOTE: This parameter is OPTIONAL.  It will try to 
-##     locate outbound interface  on multihomed host.
-##     By default forward requests use the incoming
-##     socket disregarding the destination location.
-##     When enabled Kamailio will select a socket that 
-##     can reach the destination. This reduces performance.
-mhomed=0
+#!substdef "!TLS_WSS!tls:MY_IP_ADDRESS:8443!g"
 
-## NOTE: These parameters are OPTIONAL.
-##     The configuration will listen on 5060 and 7000
-##     of MY_IP_ADDRESS (configured above).  If you 
-##     have websockets role enabled it will
-##     listen on 8080.  If you need additional ports
-##     or IPs add listen parameters bellow.
-##     E.g.: listen=udp:4.2.2.2:5060
+## YOU SHOULD NOT HAVE TO CHANGE THESE!
+##     This will bind the default SIP listeners
+##     as determined above.  The tls-role and 
+##     websocket-role will use the appropriate
+##     definitions if enabled.  These are here
+##     for those with complex layouts who know
+##     what they are doing :)
 listen=UDP_SIP
 listen=TCP_SIP
 listen=UDP_AGL_SIP
diff --git a/kamailio/websockets-role.cfg b/kamailio/websockets-role.cfg
index 737b112..03fbd31 100644
--- a/kamailio/websockets-role.cfg
+++ b/kamailio/websockets-role.cfg
@@ -2,7 +2,7 @@ tcp_accept_no_cl=yes
 
 listen=TCP_WS
 #!ifdef TLS-ROLE
-listen=TLS_WS
+listen=TLS_WSS
 #!endif
 
 ######## Generic Hash Table container in shared memory ########