You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
111 lines
4.4 KiB
111 lines
4.4 KiB
################################################################################
|
|
## ROLES
|
|
################################################################################
|
|
## Enabled Roles
|
|
#!trydef DISPATCHER_ROLE
|
|
#!trydef NAT_TRAVERSAL_ROLE
|
|
#!trydef REGISTRAR_ROLE
|
|
#!trydef PRESENCE_ROLE
|
|
#!trydef RESPONDER_ROLE
|
|
#!trydef NODES_ROLE
|
|
#!trydef FAST_PICKUP_ROLE
|
|
#!trydef PRESENCE_QUERY_ROLE
|
|
|
|
## Disabled Roles - remove all but the last '#' to enable
|
|
# # #!trydef TRAFFIC_FILTER_ROLE
|
|
# # #!trydef WEBSOCKETS_ROLE
|
|
# # #!trydef TLS_ROLE
|
|
# # #!trydef ANTIFLOOD_ROLE
|
|
# # #!trydef RATE_LIMITER_ROLE
|
|
# # #!trydef ACL_ROLE
|
|
# # #!trydef MESSAGE_ROLE
|
|
# # #!trydef PUSHER_ROLE
|
|
# # #!trydef REGISTRAR_SYNC_ROLE
|
|
# # #!trydef PRESENCE_NOTIFY_SYNC_ROLE
|
|
|
|
################################################################################
|
|
## SERVER INFORMATION
|
|
################################################################################
|
|
## CHANGE "kamailio.2600hz.com" TO YOUR SERVERS HOSTNAME
|
|
#!substdef "!MY_HOSTNAME!kamailio.2600hz.com!g"
|
|
|
|
## CHANGE "127.0.0.1" TO YOUR SERVERS IP ADDRESS
|
|
## Usually your public IP. If you need
|
|
## to listen on addtional ports or IPs
|
|
## add them in "BINDINGS" at the bottom.
|
|
#!substdef "!MY_IP_ADDRESS!0.0.0.0!g"
|
|
|
|
## CHANGE "kazoo://guest:guest@127.0.0.1:5672" TO THE AMQP URL
|
|
## This should be the primary RabbitMQ server
|
|
## in the zone that this server will service.
|
|
#!substdef "!MY_AMQP_URL!kazoo://guest:guest@127.0.0.1:5672!g"
|
|
|
|
## This parameter is only required if you are using websockets
|
|
## This value must be present in the HTTP
|
|
## Origin header on a new websocket request
|
|
## or it will be rejected. If you remove
|
|
## it completely the validation will be disabled.
|
|
#!substdef "!MY_WEBSOCKET_DOMAIN!2600hz.com!g"
|
|
|
|
################################################################################
|
|
## DATABASE
|
|
################################################################################
|
|
## This parameter is OPTIONAL
|
|
## If you would like to use an external database
|
|
## remove all but the last '#' and configure the connector
|
|
## accordingly. The example shows how to use postgres.
|
|
## See the kamailio documentation for more details.
|
|
# # #!substdef "!KAMAILIO_DBMS!postgres!g"
|
|
# # #!substdef "!KAZOO_DB_URL!postgres://kamailio:kamailio@127.0.0.1/kamailio!g"
|
|
|
|
################################################################################
|
|
## UDP PARAMETERS
|
|
################################################################################
|
|
## This parameter is OPTIONAL
|
|
## If large UDP packets are dropped by the
|
|
## interface try uncommenting this option.
|
|
## However, you MUST match this to your
|
|
## network adapter! If they do not match,
|
|
## all UDP packets over this limit WILL FAIL!
|
|
## E.g.: Add MTU=1472 to the /etc/sysconfig/network-scripts/XXX
|
|
# udp4_raw_mtu = 1472
|
|
|
|
################################################################################
|
|
## BINDINGS
|
|
################################################################################
|
|
## This parameter is OPTIONAL.
|
|
## It will try to locate outbound interface
|
|
## on multihomed host. By default forward
|
|
## requests use the incoming socket disregarding
|
|
## the destination location. When enabled Kamailio
|
|
## will select a socket that can reach the
|
|
## destination. This reduces performance.
|
|
mhomed=0
|
|
|
|
## YOU SHOULD NOT HAVE TO CHANGE THESE!
|
|
## By setting MY_IP_ADDRESS above these will resolve
|
|
## to the proper bindings. These are here
|
|
## for those with complex layouts who know
|
|
## what they are doing :)
|
|
#!substdef "!UDP_SIP!udp:MY_IP_ADDRESS:5060!g"
|
|
#!substdef "!TCP_SIP!tcp:MY_IP_ADDRESS:5060!g"
|
|
#!substdef "!TLS_SIP!tls:MY_IP_ADDRESS:5061!g"
|
|
#!substdef "!UDP_ALG_SIP!udp:MY_IP_ADDRESS:7000!g"
|
|
#!substdef "!TCP_ALG_SIP!tcp:MY_IP_ADDRESS:7000!g"
|
|
#!substdef "!TLS_ALG_SIP!tls:MY_IP_ADDRESS:7001!g"
|
|
#!substdef "!TCP_WS!tcp:MY_IP_ADDRESS:5064!g"
|
|
#!substdef "!UDP_WS_SIP!udp:MY_IP_ADDRESS:5064!g"
|
|
#!substdef "!TLS_WSS!tls:MY_IP_ADDRESS:5065!g"
|
|
#!substdef "!UDP_WSS_SIP!udp:MY_IP_ADDRESS:5065!g"
|
|
|
|
## YOU SHOULD NOT HAVE TO CHANGE THESE!
|
|
## This will bind the default SIP listeners
|
|
## as determined above. The tls-role and
|
|
## websocket-role will use the appropriate
|
|
## definitions if enabled. These are here
|
|
## for those with complex layouts who know
|
|
## what they are doing :)
|
|
listen=UDP_SIP
|
|
listen=TCP_SIP
|
|
listen=UDP_ALG_SIP
|
|
listen=TCP_ALG_SIP
|