Convenience macros to enable and disable thread cancellation
Change-Id: I1c588af83a4c6a45c60b60d941aa446b07e72978
(cherry picked from commit 08a05e76ec)
Legacy UDP/TCP control protocols don't provide information about RTP
payload types, therefore don't pretend that we know that this is RTP.
Setting the RTP flag without knowing the payload types has the undesired
side effect that unknown payload types (all of them) would not be
handled by the kernel module.
Change-Id: I5882f777a5912b912ec7c870f21c77aac8127600
(cherry picked from commit e811cd474d)
Instead of just leaving the transport protocol unset when we know we're
not supposed to be aware of the protocol, add a special entry to
suppress the pointless warning message.
Change-Id: I228c2f1652320627f974d9d7bcb0b1345adce2be
(cherry picked from commit 7ed04c3949)
Legacy protocols don't set sp->num_ports. Use a sensible default for
this case.
Probably a regression from 2d2d7665b
Change-Id: Idcbc477a68b6db70a91a5d082736ac642c50ab15
(cherry picked from commit 302f7d6457)
Move some code around to eliminate some redundant code paths.
Change-Id: I419728376aafe2561b5a2224b2f635d505936ee3
(cherry picked from commit 7a5069b194)
This is a regression from the overhaul of the stats bookkeeping code.
Change-Id: I9b7c2084fb20407e5a2a24fdf802b8fd6831dc75
(cherry picked from commit 9a3ced05ff)
The packet must be decrypted first before RTP padding can be considered,
as the padding count is part of the encrypted payload as well.
Change-Id: I6aecff636efd420401856bb8110b3d784f989179
(cherry picked from commit 9e09cf3c40)
If an offer is going to a side that is already known to support
rtcp-mux, don't try to offer a fallback RTCP port. Do this by pretending
that rtcp-mux=require is set, which leads to the correct behaviour. This
is needed because the RTCP fallback port might already be closed, so
trying to include it in the offer would require opening a new set of
ports, which is undesirable.
closes#1494
Change-Id: I550bec08379c799cb7dd090a70d090ae47462467
(cherry picked from commit 3ac4863a94)
Newer libwebsockets versions seem to use a longer internal timeout, so
an explicit "interrupt" is needed during shutdown to prevent a long wait
time.
Change-Id: I8f28ef658169178e35b40dd44520fbd7c812b590
(cherry picked from commit 9eb7b640c2)
Zero SSRC are technically invalid, but the code accepts them as valid
and therefore sets up things like crypto contexts for zero SSRCs.
Consequently it's possible to have a zero SSRC first in the list of
SSRCs and other valid SSRCs later in the list, which means we can't use
the presence of a non-zero SSRC first in the list as a flag to determine
whether SSRC tracking is in use or not. Use an explicit flag instead.
Change-Id: I88736e5d6b0f66c58f8d675137231760951e7610
(cherry picked from commit 85ec6e2870)
Don't increase the index pointer before using it. This fixes slots 1 and
2 being filled before slot 0, which ends up filling slots 0 and 2 first
(due to swapping with slot 0), leaving slot 1 empty.
Change-Id: If34cf561fcb153edde6408252c3286c8c80991bc
(cherry picked from commit 6d26df0580)
Starting with release 5.1, ffmpeg obsoletes the `channels` and
`channel_layout` fields, replacing them with a unified `ch_layout`
struct of type AVChannelLayout. Add wrapper defines into the
compile-time build-test headers fix_frame_channel_layout*.h to
accommodate both new and old versions.
Change-Id: I3d43b85dc3140155a61b1cf2269cda166ad88e9a
(cherry picked from commit 206ea9efd5)
Keyspace notifications are set up before existing calls are restored
(restore_thread). Therefore the following scenario is possible:
NOTIF THREAD: receives SET, creates call
RESTORE THREAD: executes KEYS *
NOTIF THREAD: receives another SET:
NOTIF THREAD: does call_destroy(), which:
adds ports to late-release list
RESTORE THREAD: comes across call ID, does GET
RESTORE THREAD: creates new call
RESTORE THREAD: wants to allocate ports, but they're still in use
NOTIF THREAD: now does release_closed_sockets()
Use a multi-A multi-B lock to protect the two code sections from each
other and make sure that notification threads have always released all
ports before a restore thread attempts to allocate any.
Reported in #1503
Change-Id: I322062488e2ce3515c5a3e6609a5700830ac1fd4
To prevent a race condition that might miss updates about call info, set
up the Redis keyspace notifications first and then run loop to restore
calls from the existing data.
closes#1503
Change-Id: I6afa4c50fe0a34c602063fc2f45b2ee38133cf1e
Allow override the bitrate if one is already set, as opus_init()
initially sets a default bitrate, which is then overridden by codec-set.
Change-Id: Id0253d23a8f5de977e30d296872ea1df01fdbfbc
(cherry picked from commit 12d59b06ee)
To safeguard against non-refcounted objects being left over in a log
info piece (e.g. a string on the stack), add this new function to pop
pieces from the stack until the desired one is removed. This is needed
in case of a unpaired log_info_* without a matching log_info_pop.
closes#1511
Change-Id: I689de14d034df779521dfdf59f923fdbf7fabc9b
(cherry picked from commit 59a16e747b)
To safeguard against leftover log info pieces, add additional resets
within loops that might run repeatedly.
Relevant to #1511
Change-Id: I875f1683b7dc8cee359469e8062c08c3c3e48a9d
(cherry picked from commit 38ebbfc8dc)
The PT tracker doesn't distinguish between audio/media types and
supplemental types, so in order not to break DTMF handling we must take
all combinations of primary (audio/media) types and supplemental types
as both input types and handler types into account.
Fix-up for 74075f6396
Fix-up for I57e1278e4fad157083d9526d4829f2940581687f
closes#1508
possibly also #1504
Change-Id: If7b242def2d35fbed14b11d204ea328b8bfe5d79
The codec answer routine resets the codec storage and so also resets the
clock rate tracker for "touched" codecs. This leads to all codecs seen
as "not touched" in the answer routine, which in turn leads to
supplemental codecs present in the answer SDP that should not be there.
Use the "for transcoding" flag for previously present codecs to retain
the "touched" status across the codec answer routine.
Change-Id: Idc4624606f7f10d7983e22ddf856432b07421157
When doing the initial answer, the packet_stream endpoint port isn't
filled in yet. Use the stream_params port instead to test for rejected
streams.
closes#1499
Change-Id: I8f315d95521f874fb8c5e6222263d017800b5fc9
(cherry picked from commit 447f0f52d0)
When ports are closed early (while the call is still running), we must
first update a slave rtpengine with this new information (that these
ports are now closed) before actually releasing the ports ourselves. Not
doing so leads to a race condition where the master instance re-uses a
port that was just closed before the slave instance knows about the port
being closed.
We implement this using a thread-local list to keep track of ports that
were released while processing a control message, and process this list
to actually close the ports only after Redis has been updated.
Additional calls to the function to close the ports are placed in
strategic locations to make sure this is triggered in every code path.
closes#1495
Change-Id: I803f4594f30ca315da0b84c6e76893f54ca3a7c9
(cherry picked from commit 17bda4b1e8)
This prevents empty mixed output files from being created when mixed
output is enabled in the config but recording isn't active for that
call.
Change-Id: I66ead89dc8a7ea80b81164b3e24d997b0df5f37e
DTX and delay buffers and their timers are shut down during the codec
negotiation phase, which also happens for the offer side while
processing an answer. If the codec negotiation routine determines that
the existing codec handlers can be kept intact, we must restart the DTX
and delay buffers that have previously been shut down.
Buffer objects are never freed during a shutdown, therefore we simply
need to restore the contained references to indicate that these buffers
are active again.
closes#1481
Change-Id: I57181ba1655fd781a7c543ee31aa67fd179ba89b
This eliminates a spurious false warning log message for rejected
streams that use a dummy payload type
Change-Id: Id628cafb8d7c4ea576cd01ff35f5dd9cd2151280
Since we're already doing the full parsing of the request flags, use the
same function to parse all required flags
Change-Id: I0880ccbbbc36eae7b172440ce51afc1c544583a1
Richard Fuchs
szcom