Consider call_media SDP attributes as ones that were received instead of
the ones to be sent out. Use media subscriptions to look up the source
media and print that one's attributes when creating an outgoing SDP.
Change-Id: Ibdf3a77a6f8a61654e0fc7c14aae16dfc6eabf14
Fix up tests to match reordered attributes.
Remove 10-year-old a=ssrc parsing code completely as it's unused.
Change-Id: I78064b1b2f27a442fe8bf4b448c7174c5458d3b1
During an offer, we update the codecs from the given list not only on
the side of the offerer, but also on the answerer's side, in order to
perform the codec answer routine during the answer phase. While doing
this, we empty out the existing list of codecs (on both sides) and
repopulate it fresh from the given list.
This can cause problems during a reverse re-invite, when the list of
codecs on the answerer's side already contained the codecs that had been
offered before. When setting up the new re-invite offer, we want to
retain codecs (and their payload types and format parameters) that were
already in place, instead of recreating a new list from scratch.
Improve this by adding a `merge_cs` option to the populating functions,
which points back to the stream_params codec_store. Codecs that would
have been removed from the codec_store during the repopulation are then
moved back into the stream_params codec_store instead. This then allows
the functions adding new codecs to the list (offer/transcode) to
reference these codecs that were previously in place, and so they can be
added back with the same options as they had existed before, instead of
recreating them from scratch.
Change-Id: I53e7ab10e9144a308a5c36be5ebfddd73c212f06
Move `a=extmap:` attribute to the `call_media`'s
`sdp_attributes` using `stream_params`.
Required by the `insert_sdp_attributes()` used in `sdp_create()`.
Additionally revert `extmap` unit test checks in the
`testVideoroomWebRTCVideo`.
Change-Id: If63e4e8733ea0899f34fae1f1d38997e9e2c081c
We have to move the list of attributes with following types
to the `call_media`'s `sdp_attributes` using `stream_params`:
ATTR_SSRC
ATTR_MSID
ATTR_OTHER
This is then required by the `insert_sdp_attributes()`
used by:
- `sdp_replace()` -> `replace_sdp_media_section()`
- `sdp_create()`
Additionally: move the `insert_sdp_attributes()`
to the usage of the `append_attr_to_gstring()`, which
gives SDP attrs manipulations control over attributes
being inserted into SDP. Previously not supported.
Additionally: `process_media_attributes()` takes new
argument `bool strip_attr_other`, in order to control
whether or not to strip `ATTR_OTHER/ATTR_SSRC/ATTR_MSID`.
For now there is only one user of it `replace_sdp_media_section()`,
but for later on, we can control this using this bool.
Additionally: `print_sdp_media_section()` takes new
argument `bool print_other_attrs`, in order to control
whether or not to strip `ATTR_OTHER/ATTR_SSRC/ATTR_MSID`.
This is required, because the sdp replacing/creating mechanism
needs a controllable way of adding them, users are:
- `janus_videoroom_join()`
`janus_videoroom_configure()` - always need them
- `call_publish_ng` - always needs them
- `call_subscribe_request_ng` - never needs them
(otherwise leads to a duplication of such attributes)
- `call_offer_answer_ng()` - requires them always
- `call_subscribe_request_ng()` - never needs them
(otherwise leads to a duplication of such attributes)
Change-Id: I9c83d99da1603acb55443c462797b2cd1e72477d
The global list of monologues is populated in reverse order from the
list of medias. Iterate the list backwards so that the resulting medias
are in ascending order.
Change-Id: Icadca7a6cecb636ca6e021c0286b44e5cd3cdc84
To be able to use this feature from controlling agents which don't
directly support the new dictionary keys, add an alternative syntax via
the `flags` list. This is in line with all other similar dictionary keys
(e.g. `codec-` etc)
Change-Id: I7210c74c9cd3b31338052efa1c3504fe775c1c46
These are part of the extended tests which are normally disabled. Some
change in libopus results in different encodings in these cases, making
these tests fail with newer libopus versions. Accept an alternative test
result.
Change-Id: I846830a47651bf7a7f83fa0bb1f1220db77db71e
Simply stripping a supplemental codec doesn't actually affect the
remaining real codecs. Add a special-cased version of codec_touched() to
ignore such a manipulation.
Add a matching test case.
Change-Id: I4a91292dd38e1114837c2dc841afe07d87cff6cb
It substitutes a specified `a=` line taken from the concerned
media attributes list. If such line has been not found,
the attributes list remains untouched.
It subsitutes one attribute at a time, so one attribute into
another attribute.
Change-Id: Ie0a48ba46a1b196fbe33b09dedc40e4498640e34
Generate the output fmtp= string based on the preferences received from
the opposite side. Also add the required format printing function.
Change-Id: I12124efe0b9876c6571bc32c1c45744af80b83d3
This commit parses out the string, but doesn't do anything with the
values except for the FEC flag. Move the FEC on/off switch from the
extra codec options into the `fmtp` string.
Change-Id: I51f74f7cb62dd49a9af9815920f077bf300cfa33
The test number 1142:
"SDP attr manipulations - add a= line for media audio, two times"
used to fail on the buster builds, because of the hash tables
implementation we had in the `command_values` of the `struct sdp_command`.
It didn't necessarily keep the same order, as was used to add values.
Now as the SDP manipulations structures is re-designed, we can re-add it.
Change-Id: Icc7d030894d45c9d62e91669915eafb348d05d97
The test number 1142:
"SDP attr manipulations - add a= line for media audio, two times"
fails on the buster builds, because of the hash tables implementation
used in the `command_values` of the `struct sdp_command`.
It doesn't necessarily keep the same order, as was used to add values.
Temporarily removing it, until the `struct sdp_command` is re-designed.
Change-Id: I077771c00c5dc8907e42d7757540e3ffa2063af6
Don't change to a new port for sendonly streams as this causes problems
with NAT. A device receiving a sendonly SDP with a new port won't send
any RTP to the new port, leading to a closed (non existent) NAT mapping.
Change-Id: I2ea2163eb9f1203226bd781b53f421c790a86f0a
New section of option flags has been introduced for SDP body
attributes manipulations.
Three levels of the SDP session are concerned:
- session level (global one)
- media level - audio
- media level - video
Three different actions are supported for now:
- add
- remove
The value of the command has a wildcard matching approach.
Other attributes apart `a=` can not be edited by this functionality.
So such headers as: `c=`, `s=`, `o=` cannot be touched.
Change-Id: I939d4582839096b2399f7ded865e91ff6eb960a4
(cherry picked from commit 3f06c18793)
Only parse out a codec type if the codec is given with any parameters
set (and not just by name). Parsing out a codec type when just its name
is given leads to a codec type with default parameters set (such as the
number of channels) which can lead to a stricter matching than desired.
When a codec is given just by name we want to match all codecs of that
type, not just the ones with the same parameters as the default ones.
Change-Id: I583bf4045dbd55291d8dc596310730024853d386
This is a new option flag, which provides a possiblity
to select specific crypto suite(s) for the offerer from
the given list of crypto suites received in the offer.
This will be used later on, when processing an answer from
the recipient and generating an answer to be sent out towards offerer.
Furthermore, this is being decided not when the answer is processed,
but already when the offer is processed.
Flag usage example:
`SDES-offerer_pref:AES_256_CM_HMAC_SHA;AES_256_CM_HMAC_SHA1_32;`
Change-Id: I2b22b38347d24f27331482e18b92305fbadb2520
Older versions of glib handle the trailing padding in base64
differently, resulting in the final character of the encoded string
coming out different.
Change-Id: I2bc1057de15f5e0bddb3de4df6cef7c4fcf7ebcc
We have to cover more cases with tests, such as:
- SDES re-ordered crypto suites, but one suite from the 'SDES-order:'
flag was not in the offer
- SDES re-ordered crypto suites, but one suite from the 'SDES-order:'
flag was not in the offer and the recipient selected it
Change-Id: I1051c01d45c4b494f768692f85d1e0c41a0ea2d2
This is a new option flag, which provides the ordered list,
in which to add crypto suites into the SDP body.
Right now they're always added in the order given in the source code.
Flag usage example:
`SDES-order:AES_256_CM_HMAC_SHA;AES_256_CM_HMAC_SHA1_32;AES_192_CM_HMAC_SHA1_80;`
This means — those listed SDES crypto suites will be added
into the generated SDP body at the top of crypto suites list, in the given order.
But, each of them is added, only if it is about to be added/generated.
In other words, the `SDES-order:` flag itself doesn't add crypto suites,
it just affects the order of those suites to be added.
And the rest of non-mentioned suites, which are also to be added,
will be appended after those given, in the free manner of ordering.
Important thing to remember - it doesn't change the crypto suite tag
for the recipient, even though changing the order of them.
Additionally.
This flag does not contradict with `SDES-nonew`, `SDES-only-` and `SDES-no-` flags.
It just orders the list of crypto suites already prepared to be sent out.
Change-Id: I0fec54f9e2f3cd4913e905e8afe825712f82d1ae
Add a new flag to only accept these individual crypto suites
and none of the others.
For example, `SDES-only-NULL_HMAC_SHA1_32`
would only accept the crypto suite `NULL_HMAC_SHA1_32` for
the offer being generated.
This also takes precedence over the `SDES-no-` flag(s),
if used together, so the `SDES-no` will be not taken into account.
This has two effects:
- if a given crypto suite was present in a received offer,
it will be kept, so will be present in the outgoing offer; and
- if a given crypto suite was not present in the received offer,
it will be added to it. The rest, which is not mentioned,
will be dropped/not added.
Flag name: 'SDES-only-<crypto name>'
Additionally: add another new flag 'SDES-nonew'.
It will not add any new crypto suites into the offer.
It takes precedence over the `SDES-no` and `SDES-only` flags,
if used in combination.
Change-Id: Ic4fa03957ee3d4d24b0c4f3fd003eada05f49b0b
Richard Fuchs
Donat Zenichev
Michael Prokop