When base chain is "none", the admin is required to manage jumping into the
rtpengine chain. The chain can't be deleted if it is still referenced by
another rule, which is common in this configuration.
closes#1787
Change-Id: I8a72e1041a364db60870b5acececc234c8452bab
(cherry picked from commit 2e7e720c94)
Telling netlink to create a chain that already exists should technically
be a no-op, BUT it still sets the policy to whatever was given as a side
effect. Make sure we don't change the policy by explicitly checking for
the chain's existence.
closes#1785
Change-Id: I526a4e2a0f9d1dcc6e0e00a6e273e4df55863d6c
(cherry picked from commit a0ba4d793d)
Graphite isn't able to deal with spaces in the metric names delivered to
it. Introduce special version of the command strings with spaces
replaced by underscores.
closes#1780
Change-Id: Ie8bcec5ca4f2d427e92901f6fa76b985df6e459e
(cherry picked from commit c6a5b53912)
Reading learned_endpoint must also be protected by the mutex.
Warned-by: Coverity
Change-Id: I9909d58e7f06806f7398c16c750a6063e923d766
(cherry picked from commit e439a27def)
In case of repeated answers without additional offer in between, we
shouldn't reset the codec tracker status at the end of the codec answer
routine, so that we end up with the same state during the next answer.
Change-Id: I54f6136cc5684473553b4862c13ea9f4a3dcfe99
(cherry picked from commit d0c59a3bad)
*** CID 1570963: Null pointer dereferences (REVERSE_INULL)
/daemon/call.c: 3553 in monologue_subscribe_answer()
3547 /* set src_media based on subscription (assuming it is one-to-one) */
3548 struct call_media * dst_media = __get_media(dst_ml, sp, flags, 0);
3549 GList * src_ml_media_it = dst_media->media_subscriptions.head;
3550 struct media_subscription * ms = src_ml_media_it->data;
3551 struct call_media * src_media = ms->media;
3552
>>> CID 1570963: Null pointer dereferences (REVERSE_INULL)
>>> Null-checking "dst_media" suggests that it may be null, but it has already been dereferenced on all paths leading to the check.
3553 if (!dst_media || !src_media)
3554 continue;
3555
3556 /* additional attributes to be carried for `sdp_create()` */
3557 if (print_extra_sess_attrs && !g_queue_find(&attr_mls, ms->monologue)) {
3558 sdp_copy_session_attributes(ms->monologue, dst_ml);
Change-Id: I391b95f61237e5a7af206b0568a1cf421dcbb8f8
From now on the `call_subscription` concept gets
deprecated, and instead of it the `media_subscriptions`
concept gets applied.
Benefits of this change is:
- ability to subscribe one-to-multiple medias (different monologues)
- media level manipulations, without affecting whole SDP session
- no need to use medias offset, to detect proper subscription's media
- there is no need of particular medias order, they can be
subscribed to each other in any possible way
(even though RFC still requires to always have proper ordering)
Deprecated objects:
- `struct call_subscription`
- `GQueue subscriptions`
- `GQueue subscribers`
- `GHashTable * subscriptions_ht`
- `GHashTable * subscribers_ht`
Deprecated functionality:
- `__unsubscribe_one()`
- `__unsubscribe_all_offer_answer_subscribers()`
- `__unsubscribe_from_all()`
- `__subscribe_offer_answer_both_ways()`
- `__add_subscription()`
- `__unsubscribe_one_link()`
- `call_get_call_subscription()`
- `call_subscriptions_clear()`
- `call_subscriptions_free()`
Offtopic: additionally this commit adds helper func:
- `call_media_subscribed_to_monologue()`
Change-Id: Ifb44f7a1ba5b483b1472882b1b8d06444dba1727
Rework the `set_monologue_flags_per_subscribers()` to work on medias
instead of working on monologues and refactor according code
appealing to this func.
Also to reflect the sense of this function better, change naming
from: `set_monologue_flags_per_subscribers()`
to: `media_update_transcoding_flag()`
Change-Id: I517ea13c91240d8fb9d3608edee16f132f4f61e1
Rework the `__update_init_subscribers()` so, that it takes:
- `call_media`
- `stream_params`
directly for processing, instead of operating on the whole ml.
Therefore also refactored code that appeals to the concerned func.
Change-Id: I56a9c6aa54b17d8c8dede2181414c481ca0cf2ca
During the `monologues_intact` stage of the `call_get_monologue_new()`
use media subscription in order to:
- update `os` ml, if still not set before
- update subscription ml's tag with totag, if not set before
After the first possible subscription's `offer/answer` ml
has been found and all work done, break cycling expecting
that this is one-to-one (so offer/answer) model, where only
medias of two monologues are involved.
Change-Id: I8b06cee2090563da4ce4c290ab3c0b9ce8c7ab3f
Rework the logic of fromtag monologue detection in the
`call_get_dialogue()`.
Fristly, try to match using given from tag (if there is one).
Secondly, try to match using given viabranch.
Thirdly, try to use top-most subscription of the top-most
media related to the totag monologue (newer behavior).
Fourthly, if still not found just create a brand-new one.
This change relates to the fact, that we stop using call monologue
subscriptions model and switch to the media based one.
Change-Id: I106bdd79f5e4754f76bd048f51c8fc211ee57410
Due to introduction of media subscriptions model.
Rely on subscription monologue's empty tag,
while trying to detect, whether or not to destroy given monologue
but with a clause that:
- this ml is subscribed to medias of other signle ml
It's important to keep this check because
if the `delete` is done with from-tag and to-tag,
just right away after an `offer` without the to-tag
and without use of via-branch, then the call's data
can potentially remain dangling without being deleted completely.
So looking up the offer side of the call through the from-tag
and then checking, if the call has not been answered
(answer side has an empty to-tag), gives a clue whether
to delete an entire call.
Additionally, introduce a helper function:
- `ml_medias_subscribed_to_single_ml()`
which checks, whether this monologue medias are subscribed
to a single other monologue medias.
Change-Id: I2474d24ac66ce2cb12bd282f2c0df809fce7880c
From now on, the newer media subscriptions based concept has been
introduced, which means the call monologue is able to have:
- medias, which have non-even amount of subscribers and subscriptions
- medias of different monologues in the media's subscriptions list
- medias of different monologues in the media's subscribers list
Further, improve the `call_get_dialogue()` accordingly so,
that a detection, whether or not a from-monologue has already seen
before given to-monologue, will be based on from-monologue's media subscriptions.
Absent to-monologue medias in from-monologue subscriptions list means —
to-monologue has been never seen before, and we have to update tags accordingly
as well as subscribe matched medias of to/from-monologue to each other.
Change-Id: Icef81d06ac2ee6e150ecdea7133547166290b015
Moving from call subscriptions to media subscriptions.
Add a possibility to run `media_stop()` and `__monologue_stop()`
for all related to this monologue media subscribers.
This is an improvement, which gives the following benefits:
- all subscribers are handled inside of the func, less code out of it
- the function gets in sync with new media subscriptions concept
Change-Id: Ia0b897f53438559a68c8b469c71fec72f0d562af
Use media subscriptions model in the `kill_calls_timer()`
to find subscribers and related monologues in order
the to update the `xmlrpc_helper` data.
Change-Id: I4e7e8586a701eeb135c34138ba5a9dc288817c8d
In the `dialogue_unconfirm()` (previously `dialogue_unkernelize()`)
use media subscriptions to find subscribers/subscriptions
and correlated to them medias to unconfirm them.
This change is bound to the switch from monologue
subscriptions to media subscriptions.
Additionally: Refactor unkernelize/unconfirm in `call.c`
To provide a sense of the functions clearer,
the namings of the following function singatures
have been changed:
- `dialogue_unkernelize()` -> `dialogue_unconfirm()`
- `__monologue_unkernelize()` -> `__monologue_unconfirm()`
Change-Id: If8cc2515eb26dcc4ffed02a420514f98d43cc5c6
Report to whom a `call_monologue` is subscribed and
who is subscribed to it using media level subscriptions
instead of using monologues one.
Change-Id: I07a7353d5682b9346d1ade25d11b902ee927d4ac
Add handling of SDP session level attributes for:
- `monologue_subscribe_request()`
- `monologue_subscribe_answer()`
This will be used by `janus.c` related functionality.
Change-Id: I1c50b5b9da08e7d8cb2c98eb6995d8610386d6ed
Move `a=extmap:` attribute to the `call_media`'s
`sdp_attributes` using `stream_params`.
Required by the `insert_sdp_attributes()` used in `sdp_create()`.
Additionally revert `extmap` unit test checks in the
`testVideoroomWebRTCVideo`.
Change-Id: If63e4e8733ea0899f34fae1f1d38997e9e2c081c
Move `a=ssrc-group:` attribute to the `call_media`'s
`sdp_attributes` using `stream_params`.
Required by the `insert_sdp_attributes()` used in `sdp_create()`.
Change-Id: I67025dc83dd8e5e46422b6dc1bc54aa9c838dfea
We have to move the list of attributes with following types
to the `call_media`'s `sdp_attributes` using `stream_params`:
ATTR_SSRC
ATTR_MSID
ATTR_OTHER
This is then required by the `insert_sdp_attributes()`
used by:
- `sdp_replace()` -> `replace_sdp_media_section()`
- `sdp_create()`
Additionally: move the `insert_sdp_attributes()`
to the usage of the `append_attr_to_gstring()`, which
gives SDP attrs manipulations control over attributes
being inserted into SDP. Previously not supported.
Additionally: `process_media_attributes()` takes new
argument `bool strip_attr_other`, in order to control
whether or not to strip `ATTR_OTHER/ATTR_SSRC/ATTR_MSID`.
For now there is only one user of it `replace_sdp_media_section()`,
but for later on, we can control this using this bool.
Additionally: `print_sdp_media_section()` takes new
argument `bool print_other_attrs`, in order to control
whether or not to strip `ATTR_OTHER/ATTR_SSRC/ATTR_MSID`.
This is required, because the sdp replacing/creating mechanism
needs a controllable way of adding them, users are:
- `janus_videoroom_join()`
`janus_videoroom_configure()` - always need them
- `call_publish_ng` - always needs them
- `call_subscribe_request_ng` - never needs them
(otherwise leads to a duplication of such attributes)
- `call_offer_answer_ng()` - requires them always
- `call_subscribe_request_ng()` - never needs them
(otherwise leads to a duplication of such attributes)
Change-Id: I9c83d99da1603acb55443c462797b2cd1e72477d
Stop using the call subscriptions model in the
subscribe request/answer functionality and move to
the media subscriptions.
Change-Id: I8aab2b1b4cdf9a3c5a04172c395ca509295ce0a3
The global list of monologues is populated in reverse order from the
list of medias. Iterate the list backwards so that the resulting medias
are in ascending order.
Change-Id: Icadca7a6cecb636ca6e021c0286b44e5cd3cdc84
The index j we get is not the position in the output array/list, but
rather the index into the source array. Simply append each new element
to the array in order.
Also make sure we don't skip over empty elements in the array when
building the JSON list, so that the order is preserved.
Change-Id: Id6577410e114f0ddbea745977118f1bab2e38fa9
For the use case with a separate base chain, we want to preempt other
firewall rules by default and insert our immediate jump rule at the
beginning, rather than at the end. Add an option to provide the other
behaviour.
Change-Id: I16171f7c028c89b94823ecc99387771be3ba9443
Alex Hermann
Richard Fuchs
Donat Zenichev
Michal Hajek
Steven Ayre