Don't explicitly set the "non forwarding" flag just because an RTCP
stream is being kernelised. The distinction between RTP and RTCP,
together with zero-length outputs setting "non forwarding" automatically
takes care of it.
Change-Id: Ie363fc369b7ace21ed172a0ec141c83afd1ba21b
Transcoding is flow-specific, so it doesn't make sense to have a flag
for it in a call_media section. Instead we use the transcoding flag set
on the call_subscription objects (on subscribers), and set/unset a flag
on the monologue struct, depending on whether any media flows (going to
subscribers) have transcoding enabled.
Change-Id: Id671d56e56a22eaa8e56f6d449770b0c7b086cea
Pass the subscription object to codec_handlers_update to eliminate the
need for a return type and the subsequent if/else.
Change-Id: I311b3e8ca14ee5090cf329163975354385cee800
Do a direct lookup of the call subscription object and set the
transcoding flag directly. Remove obsolete function.
Change-Id: I8b8329e53afb641fad80d38b45120efd46c408db
This is a convenience function that does an unnecessary loop iteration.
We have a hash table to perform the exact lookup needed. Turn the
function into a simple wrapper which uses the hash table.
Change-Id: If91976a955dea80e882656849b0b13d426e5748f
We have the subscription objects available now, so we can directly set
the transcoding flag without having to do a hash table lookup.
Change-Id: I2b85f34ca4d03dfaf81d92ea252902d1ee194efd
Instead of just return the monologues involved in an offer/answer,
return the respective subscription objects that have the monologues
pointing to each other. This makes it possible to set flags within these
objects.
Change-Id: Id88e56e1bf164a75e2172d0df04316cde5d8a955
Make it possible for a looper thread function to break out of the loop
by returning an appropriate status code.
Change-Id: I22e7789270eed4bf3340e7dae941929de58700ea
This is pointless at this stage, but makes it possible to pass
additional information to the thread in the future.
Change-Id: I9999f522e52ffd86753b291fd61e8ff8ea3e5899
Perform endpoint address check before doing ingress SSRC handling. We
don't want to act on an apparent SSRC change if the endpoint address
doesn't match and the packet should have been ignored.
Closes#1655
Change-Id: I251e23b1583b1916c7c4904cf40d3b37b3533117
Make it possible to set output-destination immediately when starting the
reording, not only afterwards.
Closes#1667
Change-Id: Idb7de770ad5a41d6ae6055784213e7983df9bfec
Deprecate increasing/decreasing functionality of
the call timer run duration, because it's not needed anymore,
most of the unnecessary functionality has been moved lately
to separate dedicated threads and the `call_timer`
is simply unloaded for now.
Additionally: remove logging with timestamps, because
we do not need to monitor it anymore.
Change-Id: I8d1fd260472528fcee6a12f48b9a92f195893787
As this is running in a separate thread now, rtpe_now needs to be set
excplicitly in each iteration.
Fix-up for 6fe9cc9
Change-Id: Icb1ec8a27389bb48ee893a9a29e4e1c11447d61c
Move the `ice_slow_timer()` functionality to a separate thread,
so that we do the work more efficiently, and not be dependent
on the call_timer runs by poller.
Furthermore it makes more sense to keep in the `ice.c`,
since it obviously has to do with ice timing.
Additionally:
Update the test-stats due to these changes in the `call_timer()`
We have to call the `ice_slow_timer()` now explicitely from
the test-stats.c, because the `call_timer()` is not anymore
responsible for providing stats counters rate calculations.
Change-Id: I03377dd59ea71c27497e1f4d30164075f05165cd
Similarly as for the `stats_rate_min_max()`,
move the `stats_counters_calc_rate()` functionality
to the same separate thread, so that we do the work
more efficiently and not be dependent on the call_timer
runs by poller.
Furthermore it makes more sense to keep in the `statistics.c`,
since it obviously has to do with statistics.
Additionally:
Update the test-stats due to these changes in the `call_timer()`
We have to call the `stats_counters_calc_rate()` now explicitely from
the test-stats.c, because the `call_timer()` is not anymore
responsible for providing stats counters rate calculations.
Change-Id: I1682eb76e3057f0f431c27b9633717d965313a1a
Support the "id" parameter for the "join" as "publisher" message.
Preempts choosing a random feed ID.
Add a test case for this.
Change-Id: Iae8c2f50864adf913b288085aa70d5427e0a4456
Simply stripping a supplemental codec doesn't actually affect the
remaining real codecs. Add a special-cased version of codec_touched() to
ignore such a manipulation.
Add a matching test case.
Change-Id: I4a91292dd38e1114837c2dc841afe07d87cff6cb
To do the work more efficiently,
and not be dependent on the call_timer runs by poller,
we should move the ports iterations (stats update from the kernel)
functionality to a separate thread, to make it faster and
not be dependent on what happens in the `call_timer` at all.
Since it has nothing to do with the call timers.
As an additional benefit: we unload the `call_timer` runner.
Change-Id: I511529ce504ef3d29f4e9d6d731ffd470d78d27a
Due to multiple threads polling all sockets for read events, it's
possible for one socket to receive a read event in one thread, then
immediately receive another read event in another thread, resulting in
two threads reading packets from the same socket at the same time.
While this is perfectly valid and correctly handled by mutex etc, it can
result in packets being processed out of order. In media passthrough
scenarios which don't do sequencing this can result in packets being
reordered.
Using a simple atomic counter we can ensure that only one thread is
reading from any one socket at a time.
Relevant to #1638
Change-Id: I406491d6ae5e13e618e153ba5463fd9169636016
Don't try to interpret or schedule DTMF packets if we're just doing RTP
passthrough.
Without tracking the seqencing and timestamping of the primary media
stream, we cannot actually schedule DTMF packets properly. Use the
presence of a defined output sequence number to make this determination.
The other case that uses a predefined output sequence number is when
media is coming from a pre-coded media player stream. The same thing
applies: These packets are already scheduled, so we can skip trying to
schedule them again.
closes#1638
Change-Id: I2d2c20e731f20a3136ca3eee37f0b521062cdb11
To do the work more efficiently,
and not be dependent on the call_timer runs by poller,
we should move the `stats_rate_min_max()` to a separate thread,
to make it faster and not be dependent on what happens in the `call_timer` at all.
Since it has nothing to do with the call timers.
Change-Id: I9a39e1b63cb8741377f5af5b2d52d4f8b428a0ad
Pandoc is available even on stretch, and unlike ronn is
actively maintained.
Fix -- markdown escaping.
Use __x__ for bold, and *x* for italics.
Remove .8.ronn symlinks.
Change-Id: Iff70e2b405f3b9ede856abf94d42fc51afb9f809
To do the work more efficiently and not be dependent on
the `call_timer` runs by poller, we should move
the releasing of sockets to a separate thread, to make it
faster and not be dependent on what happens in the `call_timer`
at all. Since it has nothing to do with the call timers.
Since now we have two queues:
- thread scope (local): ports_to_release
- global one: ports_to_release_glob
`sockets_releaser()` uses the ports_to_release_glob,
meanwhile appending in the `call_timer()` happens using the
ports_to_release.
Change-Id: Iadd966ac895b2dd64f81269d4fdf5d83747fe0b7
Deprecate usage of the bit flags for return.
And instead do:
- only return true/false for the redis update
- check if we have to destroy the whole call using the
`call_monologues_associations_left()` only
Additionally remove unused variables.
Change-Id: Ie858c533d1aa4b74024d65c7064aa56437389882
Richard Fuchs
Donat Zenichev
Stefan Mititelu