When a receiving socket doesn't match the socket we were expecting, make
sure that the receiving socket is actually one of the sockets we want to
use at this point before blindly switching the socket.
This fixes a race condition after a re-invite: A new set of sockets has
been opened, but an old/delayed RTP packet still arrives on one of the
old ports. In this case we don't want to switch the local socket.
Change-Id: I4e2b87ad608b1a9c6a0bb2eae5c305fd79be70d5
(cherry picked from commit d36fa163a1)
Support fake bind() on non-INET sockets. This fixes the tests when
building against libwebsockets19 4.3.2-1.
Change-Id: I91e5271e8b0cd5a0fa10317bae059615b234926c
(cherry picked from commit 2f4ed358c0)
1) Read dtxb->start while the lock is held (not strictly necessary as
the read should be atomic anyway)
2) Expect that dtxb->start can be larger than rtpe_now.tv
The latter can happen as `rtpe_now` in a timer thread is faked to be
exactly the time when the timer was supposed to run, and not the actual
current time, which means that a newly added packet can have a later
time stamp than the "now" the timer thread is using.
Change-Id: I48fd7f78af97c6d5b802e5151d69855a90f4032d
Unmark a monologue that has been scheduled for deletion when it's
associated with another one, which happens during offer/answer.
Fixes a regression from 53dbef7e1 which removed this logic from
__monologue_unkernelize with re-adding it elsewhere.
Change-Id: I037162e91fec42631680f7767f58b172fd6e04db
(cherry picked from commit afb42551c4)
`call_get_monologue_new` is supposed to always return a full dialogue,
but an error in invocation (using a from-tag that doesn't belong to an
offer/answer) can lead to the second half being unset. Return an error
in this case.
Change-Id: I84b21ff5e5c0403fc07cae83fee206705ecff8b3
(cherry picked from commit c8171f7609)
During offer/answer, we remove existing subscriptions before
re-establishing the new set of subscriptions. But we must also remove
the subscriptions of previous subscribers in order to keep the lists of
subscriptions and subscribers correctly reciprocal.
Change-Id: I7d39fa59892159f41033ae6a40e7cb51d861b12e
(cherry picked from commit 41b0236915)
Use the new `associated_tags` table to determine which tags are
associated with which. Iterate the associations between tags in a
tree-like manner and do this at the moment the `delete` command is
received. Break up the `associated_tags` links at this time, and
determine which tags would be left dangling and mark all of these for
deletion. If no tags are left after this process, mark the entire call
for deletion.
The previous approach was cumbersome and prone to errors. Using tag
names and branch names to determine which tags are associated with which
is a pointless hurdle, and using a table of associations that is
explicitly kept for this purpose is a much cleaner approach. Also
postponing the decision about which tags to delete until the time the
deletion actually happens can lead to tags not being deleted, when they
really should be (e.g. A -> B, delete A, A -> C).
Change-Id: I03ae57d0a2117ecd721372c1a49468fc34dd630c
(cherry picked from commit 53dbef7e1a)
Keep track which tags (monologues) were created together as part of an
offer/answer exchange with a separate hash table, regardless of whether
these monologues actually have tagged names or are just nameless
branches.
Change-Id: I60aa114c8caf6ecdff4705e3399f60190d04dda6
(cherry picked from commit 6f0ad0db0f)
Usually supplemental RTP types (DTMF) are listed after the primary audio
codecs. In the case of the order being reversed, fix `single-codec` so
that it doesn't strip the actual audio codec that is listed after the
DTMF type.
Change-Id: I1b03b89e31bebf4de303b643dcf08d2ffb90ebaf
In some cases it's possible that some packets still arrive in userspace
immediately after a stream has been pushed to the kernel, for example if
some packets are already in the queue or if there is some processing
delay (e.g. writing to Redis). Allow for a short delay before counting a
stream as userspace if it has been pushed to the kernel.
Change-Id: I55a6e255868c8c2a9e93355a4aa2287f07b3748d
(cherry picked from commit 8a99171200)
Legacy UDP/TCP control protocols don't provide information about RTP
payload types, therefore don't pretend that we know that this is RTP.
Setting the RTP flag without knowing the payload types has the undesired
side effect that unknown payload types (all of them) would not be
handled by the kernel module.
Change-Id: I5882f777a5912b912ec7c870f21c77aac8127600
(cherry picked from commit e811cd474d)
Instead of just leaving the transport protocol unset when we know we're
not supposed to be aware of the protocol, add a special entry to
suppress the pointless warning message.
Change-Id: I228c2f1652320627f974d9d7bcb0b1345adce2be
(cherry picked from commit 7ed04c3949)
Legacy protocols don't set sp->num_ports. Use a sensible default for
this case.
Probably a regression from 2d2d7665b
Change-Id: Idcbc477a68b6db70a91a5d082736ac642c50ab15
(cherry picked from commit 302f7d6457)
Move some code around to eliminate some redundant code paths.
Change-Id: I419728376aafe2561b5a2224b2f635d505936ee3
(cherry picked from commit 7a5069b194)
This is a regression from the overhaul of the stats bookkeeping code.
Change-Id: I9b7c2084fb20407e5a2a24fdf802b8fd6831dc75
(cherry picked from commit 9a3ced05ff)
frame->linesize has padding and alignment issues. Explicitly calculate
the buffer size instead.
Change-Id: Ib3fb6bcbd855ca9a3e9b01e131002de06984c292
(cherry picked from commit f0b0feeca7)
Instead of waiting for the garbage collector to clean up the SSRCs
objects, do it immediately when a delete is seen. This closes output
files and TLS connections more quickly.
Change-Id: I9a0a5be8194ba8597ff10e428d67d3a5654a2b62
At least the recording daemon uses the linesize directly, so this needs
to be corrected after returning a frame from the resampler.
Change-Id: Ia940d8acbbee3fb2d6564474ecb93ae27422d8af
The packet must be decrypted first before RTP padding can be considered,
as the padding count is part of the encrypted payload as well.
Change-Id: I6aecff636efd420401856bb8110b3d784f989179
Older debhelpers don't support conditional installation locations.
Restore the previous approach of doing it through the rules file.
Change-Id: I427b44bed24bd9956c33c81cd28a75b262c46b68
execute_after_dh_install is not used in the current rules file any more,
therefore no point in changing it for the backports
Change-Id: Icd375ba51530701d37dc8fc179424629cbd5218c
This distinguishes `to-label` from `set-label` for media blocking
methods, when previously they were synonymous.
Upgrade sink determination to list at the same time.
Change-Id: I5b35c78f2f307867b51b5376d5a6afbd79128d99
This makes it possible to have different media silencing options for
different outputs. Functionally this commit alone is a no-op.
Change-Id: I967c3e07ea4645bb49ccb76db12d51ded2d72f06
Make kernelize_one eturn the list of sorted payload types back to the
calling function instead of only keeping it temporarily. This makes it
possible to re-use the list in repeated invocations of the same
function.
Change-Id: I696b4d033715bb60c80c8b932b80d558f364a5c5
Don't keep the flag for "no kernel support" set indefinitely as
conditions might change, re-enabling kernel support at a later time.
Change-Id: Id8f456b653f1ea3d6a9db1ff3a0800d3cca8fcc5
Create a dedicated struct to hold certain attributes shared by both sink
handlers and media subscriptions, as a preparation to simplify handling
these attributs.
Change-Id: I866159c33ed6d6a2873d2cf68c4906ea705d253e
This makes it possible to refactor and simplify the interface functions,
as pointers and offsets can't be utilised with bit fields.
Change-Id: I70f1ac0eca7d2ccf8e8d5f5794580163f3f5b7ad
Richard Fuchs
Sipwise Jenkins Builder